Product ID:RMA321 SOLDER PASTE, 60/40 & 63/37, 89-2-80
MSDS Date:04/16/1988
FSC:3439
NIIN:00-434-5710
MSDS Number: BJQBX

ALPHA METALS

600 ROUTE 440
JERSEY CITY, NJ 07304
US

Emergency Phone: 201-434-6778

Info Phone: 201-434-6778

Cage: 96613

FRYS METALS INC (FORMER ALPHA METALS)

JERSEY CITY, NJ 07304 US

Telephone: 201-434-6778

Cage: 96613

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 33-36%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 53-56%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

DIETHYLENE GLYCOL MONOBUTYL ETHER

CAS: 112-34-5

RTECS: KJ9100000

Fraction By Weight: <5%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:PRODUCT PRODUCES THERMAL BURNS ON
CONTACT DURING THE SOLDERING OPERATION. INHALING FLUX FUMES MAY
CAUSE PULMONARY EDEMA. CHRONIC INHALATION OF THE METAL FUMES
ASSOCIATED WITH SOLDERING MAY CAUSE LEA D POISONING.
Explanation of Carcinogenicity:LEAD AND SOME LEAD COMPOUNDS ARE LISTED.
SEE INDIVIDUAL REPORTS FOR DETAILS.
Effects of Overexposure:EYE:IRRITATION,THERMAL BURNS. SKIN:THERMAL
BURNS. INHALED:RESPIRATORY IRRITATION, PULMONARY EDEMA.
LEADPOISONING. INGESTED:LEAD POISONING.
Medical Cond Aggravated by Exposure:PEOPLE WITH LEAD OVEREXPOSURE MAY
BE AT INCREASED RISK.

First Aid:EYE:FLUSH W/WATER 15 MIN. SKIN:NORMAL FIRST AID FOR THERMAL
BURNS. INHALED:REMOVE TO FRESH AIR. INGESTED:AN UNLIKELY
EXPOSURE. IF INGESTION OCCURS, GET IMMEDIATE MEDICAL CARE. MONITOR
BLOOD LEAD CO NTENT.

Flash Point:NON-FLAMMABLE
Extinguishing Media:PRODUCT IS NON FLAMMABLE. EXTINGUISH FIRE WITH
MEDIA APPROPRIATE FOR SOURCE OF FIRE.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS OF LEAD/LEAD OXIDE.

Spill Release Procedures:ALLOW TO COOL AND PICK OR SWEEP UP.
Neutralizing Agent:NONE

Handling and Storage Precautions:STORE IN A COOL DRY AREA. 'EMPTY'
CONTAINERS MAY CONTAIN RESIDUE OR VAPOR. TREAT THEM WITH THE
RESPECT DUE FULL ONES. DO NOT CUT,WELD,ETC. ON THEM.
Other Precautions:SEE "SAFETY IN SOLDERING" BY LEAD INDUSTRIES ASSOC.
292 MADISON AVE NEW YORK,NY 10017. DO NOT EAT, DRINK, SMOKE, OR
APPLY MAKE-UP IN AN AREA WHERE SOLDER PASTE IS USED.

Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR FOR METAL/METAL OXIDE FUME IF PEL/TLV IS EXCEEDED.
Ventilation:USE LOCAL EXHAUST TO KEEP EXPOSURES BELOW PEL/TLV
Protective Gloves:TO PROTECT FROM THERMAL BURNS
Eye Protection:SAFETY GLASSES OR SPLASH GOGGLES
Other Protective Equipment:AS NEEDED TO PROTECT FROM THERMAL BURNS.
Work Hygienic Practices:USE GOOD CHEMICAL HYGIENE PRACTICES. AVOID ANY
POSSIBILITY OF INGESTION OR INHALATION OF LEAD FUMES.
Supplemental Safety and Health

HCC:N1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY,HEAVY VISCOSITY PASTE,MILD ODOR

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXTREMELY HIGH TEMPERATURES
Hazardous Decomposition Products:LEAD OXIDE FUMES

Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.
RECOVER METAL IF POSSIBLE, OR LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.