BJQMH - PSI 631 SILICONE SEALANT, PN 7-600

  • MSDS: BJQMH
  • Manufacturer: POLYMERIC SYSTEMS INC
  • Product Name: PSI 631 SILICONE SEALANT, PN 7-600
  • National Stock Number: 8040-00-144-9774
Product Identification

Product ID:PSI 631 SILICONE SEALANT, PN 7-600
MSDS Date:12/01/1987
FSC:8040
NIIN:00-144-9774
MSDS Number: BJQMH

Responsible Party
POLYMERIC SYSTEMS, INC.
WHEATLAND AND MASON STREETS
PHOENIXVILLE, PA 19460
US

Emergency Phone: 215-935-1170

Info Phone: 215-935-1170

Preparer: ED CLUFF

Cage: 0KND3

Contractor
POLYMERIC SYSTEMS, INC.
PHOENIXVILLE, PA 19460 US

Telephone: 610-935-1170

Cage: 0KND3

Ingredients

ALKYLOXIMINOSILANE

CAS: 22984-54-9

Fraction By Weight: <6%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF MUCOUS
MEMBRANE. INGESTION: IRRITATION OF INTESTINAL TRACT. SKIN
CONTACT: IRRITATION. EYE CONTACT: IRRITATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. INGESTION: DO NOT INDUCE
VOMITING. CONSULT A PHYSICIAN. SKIN CONTACT: WASH WITH SOAP AND
WATER. EYE CONTACT: FLUSH WITH WATER AT LEAST 15 MINUTES.
CONSULT A P HYSICIAN IF IRRITATION PERSISTS.

Fire Fighting

Flash Point Method:OC
Flash Point:250F,121C
Extinguishing Media:WATER, CO2, DRY CHEMICALS AND SAND.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:TOXIC GASES AND AEROSOLS MAY BE PRODUCE
BY COMBUSTIONS, E.G. CO, SIO2.

Accidental Release

Spill Release Procedures:USE AN ABSORBENT OR LET CURE IN AIR.

Handling

Handling and Storage Precautions:STORE BELOW 122 F (50 C).
Other Precautions:DO NOT INGEST.

Exposure Controls

Respiratory Protection:AIR SUPPLIED OR SELF-CONTAINED BREATHING
APPARATUS IN UNVENTILATED AREA.
Ventilation:GENERAL MECHANICAL: RECOMMENDED. LOCAL EXHAUST: MAY BE
REQUIRED IN POORLY VENTILATED CLOSED QUARTERS.
Protective Gloves:BUTYL
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

HCC:N1
Vapor Pres:<5 MM HG
Vapor Density:>1
Spec Gravity:1.3
Evaporation Rate & Reference:>1
Solubility in Water:<1
Appearance and Odor:PASTE LIKE; SLIGHT MEDICINAL ODOR.
Percent Volatiles by Volume:<5

Stability

Stability Indicator/Materials to Avoid:YES
AVOID EXPOSURE TO MOISTURE DURING STORAGE.
Stability Condition to Avoid:STORE BELOW 50C.

Disposal

Waste Disposal Methods:DISPOSE IN LANDFILL AS SYNTHETIC RUBBER SCRAP.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.