BJTQG - TEMPORARY SPLINT MATERIAL
- MSDS: BJTQG
- Manufacturer: BUFFALO DENTAL MFG CO INC
- Product Name: TEMPORARY SPLINT MATERIAL
- National Stock Number: 6520-00F014121
Product Identification
Product ID:TEMPORARY SPLINT MATERIAL
MSDS Date:08/12/1988
FSC:6520
NIIN:00F014121
MSDS Number: BJTQG
Responsible Party
SYOSSET, NY 11791
Emergency Phone: (516) 496-7200
Info Phone: (516) 496-7200
Cage: 09496
Contractor
Telephone: 516-496-7200
Cage: 09496
Ingredients
DIETHYL PHTHALATE (SARA III)
CAS: 84-66-2
RTECS: TI1050000
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: THERMAL BURNS. EYE/INHALATION:
LOW HAZARD. INGESTION: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:NOTE TO PHYSICIAN: BURNS SHOULD BE RELATED AS
THERMAL BURNS. PRODUCT IS A POLYMER OF LOW TOXICITY, THEREFORE
THERE IS NO NEED TO REMOVE IT FROM THE SKIN BECAUSE OF CONCERN
ABOUT TOXICITY. THE POLYMER WILL COME OFF AS HEALING OCCURS.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
COOL AS QUICKLY AS POSSIBLE W/WATER. INHALATION: REMOVE TO FRESH
AIR. GIVE CPR OR OXYGEN IF NEEDED. INGESTION: OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:CO2, DRY CHEMICAL, & WATER.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS IN
AREAS W/RESTRICTED VENTILATION.
Unusual Fire/Explosion Hazard:OVERHEATING MAY RESULT IN FIRE OR FUMES.
Accidental Release
Spill Release Procedures:WIPE UP W/PAPER TOWELS & DISPOSE OF IN
SUITABLE CONTAINER.
Handling
Handling and Storage Precautions:OVERHEATING MAY RESULT IN FIRE OR
FUMES. AVOID INHALATION OF SMOKE. PROVIDE A WELL-VENTILATED AREA.
Other Precautions:STORE AT NORMAL ROOM TEMPERATURES & HUMIDITY.
Exposure Controls
Respiratory Protection:WEAR SELF-CONTAINED BREATHING APPARATUS.
Ventilation:MECHANICAL VENTILATION. USE IN A WELL VENTILATED AREA.
Protective Gloves:CHEMICAL, THERMAL RESISTANT
Eye Protection:SAFETY GLASSES
Other Protective Equipment:LAB COAT
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. USE GOOD
PERSONAL HYGIENE.
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>257F
Spec Gravity:>1.0
Solubility in Water:INSOLUBLE
Appearance and Odor:RIGID CLEAR PLASTIC W/LOW ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT & FIRE.
Hazardous Decomposition Products:CO2, CO, FUMES, & OTHER UNDEFINED
ORGANICS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.