BJVDT - SILVABRITE
- MSDS: BJVDT
- Manufacturer: ENGELHARD CORP
- Product Name: SILVABRITE
- National Stock Number: 6810-00F014421
Product Identification
Product ID:SILVABRITE
MSDS Date:04/24/1987
FSC:6810
NIIN:00F014421
MSDS Number: BJVDT
Responsible Party
PLAINVILLE, MA 02762
Emergency Phone: (617) 695-7811
Info Phone: (617) 695-7811
Cage: 23036
Contractor
Telephone: 216-292-9200
Cage: 23036
Ingredients
SILVER (SARA III)
CAS: 7440-22-4
RTECS: VW3500000
Fraction By Weight: 4.0%
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TIN
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 96.0%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION/INGESTION: IRRITATION OF
THE RESPIRATORY TRACT, VOMITING, DIARRHEA, HEADACHE, DIZZINESS,
FEVER, CHEST PAINS, & BREATHLESSNESS. SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION/INGESTION: IRRITATION OF THE
RESPIRATORY TRACT, VOMITING, DIARRHEA, HEADACHE, DIZZINESS, FEVER,
CHEST PAINS, & BREATHLESSNESS. SKIN/EYES: IRRITATION.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Unusual Fire/Explosion Hazard:ALLOY COULD MELT & CONTINUOUS HEATING
COULD PRODUCE METAL VAPOR. TOXIC FUMES & VAPORS CAN BE EMITTED FROM
METAL ALLOY.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE CLOTHING. PUT IN A CLOSED
CONTAINER FOR DISPOSAL.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. AVOID
CONTACT W/HEAT & ACIDS. MAINTAIN AIR FLOW OF 100 LFM IN BRAZING
ZONE. AVVOD OVERHEATING WHILE SOLDERING.
Other Precautions:WEAR NONFLAMMABLE PROTECTIVE CLOTHING FOR TORCH
BRAZING. AVOID CONTACT W/SKIN.
Exposure Controls
Respiratory Protection:WEAR A NIOSH APPROVED RESPIRATOR. IN CONFINED OR
ENCLOSED AREAS USE APPROVED AIR-SUPPLIED OR SELF-CONTAINED
BREATHING EQUIPMENT TO KEEP
KEEP
Eye Protection:GOGGLES, FACE SPLASH SHIELD
Other Protective Equipment:APRON & NONFLAMMABLE PROTECTIVE CLOTHING
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text: 3632F
Melt/Freeze Pt:M.P/F.P Text:431F
Spec Gravity:7.40
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY, NO ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, SULFUR, CHLORINE, SODIUM & POTASSIUM PEROXIDE, STRONG
ACIDS
Stability Condition to Avoid:HEAT, OPEN FLAMES, & OVERHEATING WHILE
SOLDERING
Hazardous Decomposition Products:TOXIC ORGANIC OR INORGANIC TIN
COMPOUNDS, TOXIC FUMES & VAPORS
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.