Product ID:A-A-105 POLISH, METAL
MSDS Date:01/17/1991
FSC:7930
NIIN:00-266-7136
MSDS Number: BJXKQ

Emergency Phone: 800-255-3924

Info Phone: 508-667-5161

Preparer: A. VADASZ

Cage: 0J4J4

Telephone: 978-667-5161

Cage: 0J4J4

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: <20%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CAUSES EYE IRRITATION, DRYING
OF SKIN, DIZZINESS. CHRONIC: RESPIRATORY TRACT IRRITATION,
DERMATITIS. TARGET ORGANS: SKIN, EYES, RESPIRATORY SYSTEM.
Effects of Overexposure:EXCESSIVE INHALATION MAY CAUSE HEADACHE AND
DIZZINESS.
Medical Cond Aggravated by Exposure:DERMATITIS, BRONCHO-PULMONARY
PROBLEMS.

First Aid:EYE & SKIN CONTACT: BLOT WITH TOWEL, FLUSH WITH LARGE
QUANTITIES OF WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION:
INDUCE VOMITING, GET IMMEDIATE MEDICAL ATTENTION.

Flash Point Method:TCC
Flash Point:104F,40C
Autoignition Temp:Autoignition Temp Text:500 F
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:COOL CONTAINERS WITH WATER, USE SELF-CONTAINED
BREATHING APPARATUS. BURNING PRODUCT IS TOXIC.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST WHEN EXPOSED
TO EXTREME HEAT. ISOLATE FROM HEAT, SPARKS AND OPEN FLAME.

Spill Release Procedures:DIKE AND COLLECT MATERIAL INTO METAL
CONTAINER. USE NON-SPARKING TOOLS. USE WATER OR FOAM SPRAY TO
LESSEN FIRE HAZARD. USE ABSORBENT FOR SMALL SPILL.

Handling and Storage Precautions:COMBUSTIBLE, KEEP AWAY FROM HEAT,
SPARKS AND OPEN FLAME. USE ADEQUATE VENTILATION. AVOID PROLONGED OR
REPEATED CONTACT.
Other Precautions:STORE IN SECURE AREA. DISPOSE OF EMPTY CONTAINERS
SAFELY. KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:USE SELF-CONTAINED BREATHING APPARATUS FOR
CONCENTRATIONS ABOVE THRESHOLD LIMIT VALUE. ASSURE FRESH AIR
CIRCULATION.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL: REQUIRED; EXCHANGE
EVERY 10-15 MIN. SPECIAL: BLOW AIR INTO PITS & DEPRESSIONS.
Protective Gloves:REQUIRED: RUBBER, PLASTIC
Eye Protection:REQUIRED: SAFETY GLASSES
Other Protective Equipment:APRON OR SHOP COAT RECOMMENDED
Work Hygienic Practices:DO NOT EAT/DRINK OR SMOKE NEXT TO MATERIAL.
WASH HANDS/FACE AFTER WORK.
Supplemental Safety and Health

HCC:F4
Boiling Pt:B.P. Text:230F,110C
Vapor Pres:2.0 MM HG
Vapor Density:4.7
Spec Gravity:0.82
pH:8.2 *
Viscosity:200 CPS
Evaporation Rate & Reference:0.06 (BUTYL ACETATE = 1)
Solubility in Water:APPRECIABLE
Appearance and Odor:PINK, EMULSION, AMMONIA ODOR.
Corrosion Rate:*+/-.5

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME AND FIRE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE AND DIOXIDE.

Waste Disposal Methods:RECYCLE, INCINERATE OR USE HAZARDOUS WASTE
MANAGEMENT FACILITY FOR DISPOSAL ACCORDING TO STATE AND FEDERAL
REGULATIONS. EPA WASTE NO. D001.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.