Product ID:AMBERLITE (R) IRA-410 RESIN
MSDS Date:07/15/1985
FSC:8030
NIIN:00-937-4087
MSDS Number: BJXPS

Emergency Phone: 215-592-3000/800-424-9300

Info Phone: 215-592-3000

Cage: 77902

Telephone: 215-592-2521/215-592-3000

Cage: 77902

STYRENE-DIVINYLBENZENE ANION EXCHANGE RESIN

Fraction By Weight: 50-60%

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 40-50%

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Effects of Overexposure:EYE CONTACT: POSSIBLE IRRITATING TO THE EYES.

First Aid:EYE CONTACT: FLUSH EYES WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MINUTES. GET PROMPT MEDICAL ATTENTION.

Extinguishing Media:CO2, DRY CHEMICAL, WATER SPRAY
Fire Fighting Procedures:WEAR RESPIRATOR (PRESSURE-DEMAND,
SELF-CONTAINED BREATHING APPARATUS, MSHA/NIOSH-APPROVED OR
EQUIVALENT) AND FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:HYDROGEN CHLORIDE AND OXIDES OF NITROGEN.

Spill Release Procedures:FLOOR MAY BE SLIPPERY. USE CARE TO AVOID
FALLS. SWEEP-UP AND TRANSFER TO CONTAINERS FOR RECOVERY OR
DISPOSAL.

Handling and Storage Precautions:MAXIMUM OPERATING TEMPERATURE IS
75C/167F. (FUNCTION GROUP DESTRUCTION AND LOSS OF CAPACITY). AVOID
FREEZING. STORE INDOORS OR OUTDOORS.
Other Precautions:DO NOT PACK COLUMN WITH DRY ION EXCHANGE RESINS.DRY
BEADS EXPAND WHEN WETTED,WHICH CAN CAUSE A GLASS COLUMN TO
SHATTER.NITRIC ACID AND OTHER STRONG OXIDIZING AGENTS CAUSE
EXPLOSIVE-TYPE REACTION WHEN MIXED WITH ION EXCHANGE RESINS.*

Respiratory Protection:NONE REQUIRED FOR NORMAL OPERATIONS.
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:EYEWASH FACILITY.
Supplemental Safety and Health
*PROPER DESIGN OF EQUIPMENT TO PREVENT RAPID BUILD-UP OF PRESSURE IS
NECESSARY IF USE OF AN OXIDIZING AGENT SUCH AS NITRIC ACID IS
CONTEMPLATED. BEFORE USING STRONG OXIDIZING AGENTS IN CONTACT WITH
IO N EXCHANGE BEADS, CONSULT SOURCES KNOWLEDGEABLE IN HANDLING
THESE MATERIALS.

Boiling Pt:B.P. Text:212F/100C
Melt/Freeze Pt:M.P/F.P Text:32F/0C
Vapor Pres:17F @ 68F
Vapor Density:< 1
Spec Gravity:1.10
pH:4-6
Evaporation Rate & Reference:< 1 (BUTYL ACETATE = 1)
Solubility in Water:INSOLUBLE
Appearance and Odor:PALE YELLOW, TRANSLUCENT BEADS;16-50 MESH
(0.3-1.1MM)
Percent Volatiles by Volume:40-50

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH NITRIC ACID AND OTHER STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPERATURES GREATER THAN 75C/167F
Hazardous Decomposition Products:STYRENE, DIVINYLBENZENE MONOMERS AND
ALKYLAMINES.

Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.