Product ID:DRY POWDER SPOT REMOVER (816)
MSDS Date:05/26/1987
FSC:6850
NIIN:00N012392
MSDS Number: BKBRS

J. D. M. MAINTENANCE CORP

COMMACK, NY 11725
US

Emergency Phone: 516-499-0623

Info Phone: 615-499-0623

Cage: HO766

JDM MAINTENANCE CORP

379 COMMACK, NY 11725 US

Telephone: 414-354-6417

Cage: JDMMA

SILICA GEL (SILICONE DIOXIDE)

CAS: 63231-67-4

RTECS: VV7322000

Fraction By Weight: 1-5%

OSHA PEL 15 MG/M3; T DUST

ACGIH TLV: 15 MG/M3; T DUST

PERCHLOROETHYLENE (TETRACHLOROETHYLENE) (SARA III)

CAS: 127-18-4

RTECS: KX3850000

Fraction By Weight: 15-20%

OSHA PEL 100 PPM

ACGIH TLV: 25PPM/100,A3 STEL;94

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: 70-75%

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

CARBON DIOXIDE

CAS: 124-38-9

RTECS: FF6400000

Fraction By Weight: 1-5%

OSHA PEL 5000 PPM

ACGIH TLV: 5000PPM/30000STEL;93

JUDGEMENT OF MD IN RESPONSE TO REACTIONS OF

RTECS: 9999999ZZ

LD50 LC50 Mixture:LD50:(ORAL, RAT) >10000 MG/KG, INGRED 3
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY CAUSE PAIN. VAPORS MAY
IRRITATE. SKIN:PRLNGD/RPTD EXPOSURE MAY CAUSE IRRITATION. RPTD
CNTCT MAY CAUSE DRYING OR FLAKING. INHAL:MINIMAL ANESTHETIC OR
NARCOTIC EFTS MAY BE SEEN IN RANGE OF 500-1 000 PPM PROGRESSIVELY
HIGHER LEVELS OVER 1000 PPM MAY CAUSE DIZZINESS, DRUNKENNESS, CONC
AS LOW AS (SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:TETRACHLORO-ETHYLENE:IARC-GROUP 2B, NTP-
GROUP 2.
Effects of Overexposure:HLTH HAZ:10,000 PPM CAN CAUSE UNCONSCIOUSNESS
AND DEATH. VAPORS WHICH READILY ACCUMULATE CAN CAUSE UNCON & DEATH.
CHLOROCARBON/CHLOROFLUOROCARBON (CFC) MATLS HAVE PRODUCED
SENSITIZATION OF THE MYOCARD IUM TO EPINEPHRINE IN LAB ANIMALS &
COULD HAVE A SIMILAR EFT IN HUMANS. ADRENOMIMETICS (E.G.
EPINEPHRINE)(SEE SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:IRRIGATE IMMED W/WATER FOR AT LEAST 15 MINS. IF
IRRIT/REDNESS DEVELOPS, GET MD. SKIN:IMMED WASH OFF AFFECTED AREA
W/LG AMTS OF WATER. WASH W/MILD SOAP & WATER. IF IRRIT/REDNESS
DEVELOPS, GET MD IM MED. WASH CONTAM CLTHG BEFORE REUSE. INGEST:DO
NOT INDUCE VOMIT. CALL MD & TRANSPORT TO EMER FACILITY IMMED.
INHAL:IMMED MOVE TO FRESH AIR. SUPPORT BRTHG (GIVE O2/ARTF RESP) .
(SEE SUPP DATA)

Flash Point Method:OC
Flash Point:NONE
Extinguishing Media:WATER FOG
Fire Fighting Procedures:CONTENTS UNDER PRESS, HEAT MAY CAUSE BURSTING.
USE NIOSH/MSHA APPRVD PRESS DEMAND SCBA & FULL PROT EQUIP . COLD
WATER SPRAY USEFUL TO (SEE SUPP DATA)
Unusual Fire/Explosion Hazard:CANS MAY RUPTURE AND CONTENTS RELEASED
UNDER FIRE CONDITIONS; MAY CAUSE DECOMPOSITION. THERMAL
DECOMPOSITION PRODUCTS MAY INCLUDE HCL AND PHOSGENE .

Spill Release Procedures:FLOOR MAY BE SLIPPERY, USE CARE TO AVOID
FALLING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F OR 59C. KEEP
AWAY FROM STOVES FURNACES AND DIRECT SUNLIGHT. DO NOT PUNCTURE OR
INCINERATE.
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN THE GENERAL
VICINITY OF ARC WELDING, OPEN FLAMES OR HOT SURFACES. HEAT AND/OR
UV RADIATION MAY CAUSE THE FORMATION OF HCL AND/OR PHOSGENE .

Respiratory Protection:ATMOSPHERIC LEVELS SHOULD BE MAINTAINED BELOW
EXPOSURE GUIDELINES. IF NOT, USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:WELL VENTILATED AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLEAN BODY COVERING.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE AND BEFORE
EATING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
FIRE FIGHT PROC:REDUCE VAP PRESS IN CNTNR. EFTS OF OVEREXP:MAY BE
CONTRAINDICATED EXCEPT FOR LIFE-SUSTAINING USE IN HUMANS
ACUTELY/CHRONICALLY EXPOS TO CHLOROCARBONS/CFCS. FIRST AID
PROC:NOTE TO MD:DE CISION OF WHETHER TO INDUCE VOMIT OR NOT SHOULD
BE MADE BY MD. NO SPECIFIC ANTIDOTE. TREATMENT BASED ON (SEE INGRED
5)

HCC:T4
Boiling Pt:B.P. Text:165F,74C
Vapor Density:90PSIG@70F
Spec Gravity:1.3 GM/CC
Solubility in Water:VERY SLIGHT
Appearance and Odor:WHITISH LIQUID, IRRITATING ODOR AT HIGH
CONCENTRATIONS.

Stability Indicator/Materials to Avoid:YES
WATER-LONG TERM CONTACT CAN DEPLETE STABLEIZERS FOLLOWED BY SLOW
HYDORYLSIS PRODUCING CORROSIVE ACID.
Stability Condition to Avoid:OPEN FLAMES, WELDING ARCS, OR OTHER HIGH
TEMPERATURE SOURCES WHICH INDUCE THERMAL DECOMPOSITION.
Hazardous Decomposition Products:HYDROGEN CHLORIDE AND VERY SMALL
AMOUNTS OF PHOSGENE AND CHLORINE.

Waste Disposal Methods:REPLACE CAP AND DISCARD IN TRASH. IN COMPLIANCE
WITH LOCAL, STATE AND FEDERAL REGULATIONS, DUMPING INTO SEWERS, OR
INTO ANY BODY OF WATER IS STRONGLY DISCOURAGED. DO NOT INCINERATE
OR PUNCTURE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.