BKKWK - V-100 EPOXY GROUT JOINT FILLER FORMULA

  • MSDS: BKKWK
  • Manufacturer: AKEMI PLASTICS INC
  • Product Name: V-100 EPOXY GROUT JOINT FILLER FORMULA
  • National Stock Number: 8030-00N014242
Product Identification

Product ID:V-100 EPOXY GROUT JOINT FILLER FORMULA
MSDS Date:03/01/1990
FSC:8030
NIIN:00N014242
MSDS Number: BKKWK

Responsible Party
AKEMI PLASTICS INC
5265 S CLINTON TRAIL
EATON RAPIDS, MI 48827
US

Emergency Phone: 517-663-8191

Info Phone: 517-764-6060

Cage: AKEMI

Contractor
AKEMI PLASTICS INC
EATON RAPIDS, MI 48827 US

Telephone: 517-764-6060

Cage: AKEMI

Ingredients

PHENOL, NONYL (NONYLPHENOL MONOALKYL )

CAS: 25154-52-3

RTECS: SM5600000

Fraction By Weight: 40-50%


AIR RELEASE AGENT

Fraction By Weight: 0-1%

OSHA PEL 50 PPM (MFR)

ACGIH TLV: 25 PPM (MFR)


SILICA GEL (FUMED SILICA)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 0-1%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3 TDUST


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 0-1%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


GLYCERIN

CAS: 56-81-5

RTECS: MA8050000

Fraction By Weight: 0-1%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 (MIST) 9293


SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 10-15%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 0-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293


POLYOXYPROPYLENE AMINE

CAS: 9046-10-0

Fraction By Weight: 20-30%


PIPERAZINE, 1-(2-AMINOETHYL) (N-AMINOETHYLPIPERAZINE)

CAS: 140-31-8

RTECS: TK8050000

Fraction By Weight: 5-10%


EPON 820 (EPOXY RESIN)

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 0-5%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES:SEVERE BURNS, REDNESS, TEARING.
SKIN:SEVERE BURNS, DERMATITIS, IRRITATION, POSSIBLE SENSITIZATION.
INGEST:GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING.
INHAL:BREATHING VAPORS CAN CAUSE NASAL AND RESPIRATORY IRRITATION.
MFR IDENTIFIESSKIN AS A ROUTE OF ENTRY.
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ:GROUP 2A.
Effects of Overexposure:EYES:REDNESS, TEARING. SKIN:RASH, REDNESS.
Medical Cond Aggravated by Exposure:SKIN:CONTACT DERMATITIS.

First Aid

First Aid:SKIN:WASH THOROUGHLY W/SOAP & WATER, CALL MD. EYES:FLUSH
W/WATER FOR AT LEAST 15 MINUTES, CALL MD. INHAL:REMOVE TO FRESH
AIR. SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION), CALL MD .
INGES T:CALL MD IMMEDIATELY .

Fire Fighting

Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:WATER, CARBON DIOXIDE FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:ABSORB ON INERT SORBENT AND SHOVEL INTO DRUMS.
REMAINING MATERIAL MAY BE EMULSIFIED W/SOAP & WATER & ABSORB ON
ADDITIONAL SORBENT. DO NOT FLUSH IN SEWER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID PRLNGD/RPTD INHALATION OF VAPORS
& SKIN CONTACT. STORE IN DRY AREA AWAY FROM HEAT. CORROSIVE LIQUID.
DO NOT EAT, DRINK, SMOKE WHILE USING PROD.
Other Precautions:FOLLOW ALL PRECAUTIONS CONTAINED ON MSDS WHEN
PERFORMING MAINTENANCE OR NON-ROUTINE OPERATIONS ON EQUIPMENT OR
CONTAINERS WHICH CONTAIN OR HAVE CONTAINED THIS MATERIAL.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR ORGANIC
VAPORS.
Ventilation:LOCAL EXHAUST TO MAINTAIN EXPOS LEVELS BELOW PEL.
MECHANICAL EXHAUST ALSO RECOMMENDED.
Protective Gloves:IMPERVIOUS TYPE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LONG SLEEVED AND LONG LEGGED CLOTHING.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE AND BEFORE
EATING, DRINKING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Spec Gravity:1.7
Solubility in Water:SLIGHT
Appearance and Odor:BLACK THIXOTROPIC LIQUID, AMMONIACAL ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO*2, CO AND NO*X.
Conditions to Avoid Polymerization:WITH EPOXY RESINS IN UNCONTROLLED
CONDITIONS OR WHEN EXPOSED TO TEMPERATURES ABOVE BOILING POINT.

Disposal

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE AND FEDERAL
REGULALTIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.