Product ID:FT TONER TYPE 2000 (BLACK)
MSDS Date:09/23/1988
FSC:6850
NIIN:00N016907
MSDS Number: BKQPY

RICOH COMPANY LTD

1-3-6, NAKAMAGOME, OHTA-KU
TOKYO
JA

Emergency Phone: 201-882-5231

Info Phone: 201-882-5231

Cage: FO993

RICOH CORPORATION

WEST CALDWELL, NJ 07006-6304 US

Telephone: 800-336-6737

Cage: 54726

IRON OXIDE(FERROSOFERRIC OXIDE)

CAS: 1317-61-9

Fraction By Weight: 50%

OSHA PEL 10 MG(FE)/M3(TDUST)

ACGIH TLV: 10 MG(FE)/M3(FUME)

STYRENE ACRYLIC RESIN

DYE

Fraction By Weight: 2%

LD50 LC50 Mixture:ACUTE ORAL:>5G/KG - NON-TOXIC.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: NO CORRODING AND IRRITATING
EFFECTS ARE EXPECTED AT USUAL USE AS A TONER. EYE: MAY CAUSE
TEMPORARY EYE DISCOMFORT. INHAL: GASPING.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid:SKIN: WASH THOROUGHLY WITH SOAP AND WATER. EYE: TRY TO REMOVE
OR FLUSH WITH EYE DROPS FOR AT LEAST 15 MIN. IF UNSUCCESSFUL, GET
MED ATTENTION. INHAL: REMOVE TO FRESH AIR. SUPPORT BRTHG. (GIVE
O*2/ARTF RESP) . INGEST: SEEK MD IMMED .

Extinguishing Media:CO*2, DRY CHEMICALS, FOAM OR WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EUIPMENT .
Unusual Fire/Explosion Hazard:WILL NOT OCCUR.

Spill Release Procedures:SWEEP UP BY VACUUM CLEANER. REMOVE RESIDUE
WITH SOAP AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:CLEANSE SKIN THOROUGHLY AFTER CONTACT,
BEFORE BREAKS AND MEALS, AND AT THE END OF WORK PERIOD.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:NOT REQUIRED.
Ventilation:MECHANICAL ADEQUATE VENTILATION.
Protective Gloves:NOT REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:CLEANSE SKIN THOROUGHLY AFTER CONTACT, BEFORE
BREAKS, MEALS, & AT THE END OF WORK PERIOD.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:176F,80C
Spec Gravity:1.99
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK POWDER WITH SLIGHT PLASTIC ODOR.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND OTHER
DECOMPOSITION PRODUCTS IN THE CASE OF COMBUSTION.

Waste Disposal Methods:USED TONER SHOULD BE DISPOSED OF IN AN
ENVIRONMENTAL SAFE MANNER AND IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS. DO NOT INCINERATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.