BKXMW - S-110 AMASTEEL GRIT

  • MSDS: BKXMW
  • Manufacturer: ERVIN INDUSTRIES INC
  • Product Name: S-110 AMASTEEL GRIT
  • National Stock Number: 5350-00F018253
Product Identification

Product ID:S-110 AMASTEEL GRIT
MSDS Date:02/10/1989
FSC:5350
NIIN:00F018253
MSDS Number: BKXMW

Responsible Party
ERVIN INDUSTRIES INC
3893 RESEARCH PARK DRIVE
ANN ARBOR, MI 48108-2217

Emergency Phone: (313) 769-4600

Info Phone: (313) 769-4600

Preparer: DAVID A. HALE

Cage: 55807

Contractor
ERVIN INDUSTRIES INC
ANN ARBOR, MI 48108-2217 US

Telephone: 313-769-4600

Cage: 55807

Ingredients

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: >96%

OSHA PEL 10 MG/CUM

ACGIH TLV: 5 MG/CUM


GRAPHITE, SYNTHETIC

CAS: 7440-44-0

RTECS: FF5250100

Fraction By Weight: 0.8-1.3%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293


MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.5-1.3%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293


SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0.3-1.2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MANGANESE DUST OR FUME CAN
CAUSE METAL FUME FEVER & NOSE IRRITATION. INGESTION: MANGANESE
POISONING & MOUTH IRRITATION. EYES: IRRITATION CAUSED BY SHOT,
GRIT, OR DUST PARTICLES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: MANGANESE DUST OR FUME CAN CAUSE
METAL FUME FEVER OR NOSE IRRITATION. EYES: IRRITATION CAUSED BY
SHOT, GRIT, OR DUST PARTICLES. INGESTION: MANGANESE POISONING OR
MOUTH IRRITATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER TO
REMOVE ANY REMAINING PARTICLES. INGESTION: OBTAIN MEDICAL ATTENTION
IN ALL CASES.

Fire Fighting

Extinguishing Media:DRY CHEMICALS OR SAND TO EXCLUDE AIR.
Fire Fighting Procedures:CAST STEEL SHOT & GRIT WILL NOT BURN OR
EXPLODE.
Unusual Fire/Explosion Hazard:A MILD FIRE OR EXPLOSION HAZARD SITUATION
MAY BE CREATED DUE TO THE FINE DUST THAT MAY RESULT FROM USE.
AUTOIGNITION TEMP: (SOLID IRON EXPOSED TO OXYGEN) 1706F.

Accidental Release

Spill Release Procedures:SPILLS & LEAKS ON FLOOR CREATE HAZARDOUS
WALKING CONDITIONS. WEAR PROTECTIVE EQUIPMENT. RECLAIM FOR REUSE.

Handling

Handling and Storage Precautions:KEEP DRY TO REDUCE RUSTING. OBSERVE
MAXIMUM FLOOR LOADING LIMITATIONS. SHOT/GRIT BREAKS DOWN INTO
PROGRESSIVELY SMALLER PARTICLES DURING NORMAL USE.
Other Precautions:AVOID CONTACT W/EYES.

Exposure Controls

Respiratory Protection:IF THE DUST CREATED IS >TLV, WEAR NIOSH APPROVED
RESPIRATOR.
Ventilation:GENERAL OR LOCAL EXHAUST TO KEEP Eye Protection:SAFETY GLASSES W/EYE SHIELDS
Other Protective Equipment:AS REQUIRED
Supplemental Safety and Health
PERCENT SOLID BY WT: 100%

Chemical Properties

Boiling Pt:B.P. Text:5162-5702F
Melt/Freeze Pt:M.P/F.P Text:2500-2701F
Spec Gravity:>7.6
Appearance and Odor:NEAR SPHERICAL OR ANGULAR PARTICLES W/NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:SHOT & GRIT WILL BREAK DOWN INTO
PROGRESSIVELY SMALLER PARTICLES DURING NORMAL USE.

Disposal

Waste Disposal Methods:DISPOSE SHOT/GRIT AS NON-HAZARDOUS SOLID WASTE.
COLLECTED DUST FROM BLAST CLEANING/SHOT PEENING OPERATIONS ALWAYS
CONTAINS CONTAMINANTS FROM THE SURFACES. PROCESS AS HAZARDOUS
WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.