Product ID:ROHCO ARMOR PH
MSDS Date:03/01/1991
FSC:6810
NIIN:00N016677
MSDS Number: BLWJL

Emergency Phone: 216-441-4900,800-424-9300(CHEMTREC)

Info Phone: 216-621-6425

Preparer: TSCA COORDINATOR

Cage: HO874

Telephone: 216-441-4900

Cage: 98299

1)

CAS: 584-08-7

RTECS: TS7750000

Fraction By Weight: 30-50%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:STRONGLY ALKALINE.CAN CAUSE CHEMICAL
BURNS TO SKIN AND EYES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:FLUSH SKIN/EYES WITH WATER FOR AT LEAST 15 MINUTES. GET
MEDICAL ATTENTION. INGEST:CALL MD IMMEDIATELY. . INHAL: REMOVE TO
FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) .

Flash Point:NONE
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT. .
Unusual Fire/Explosion Hazard:CO*2 RELEASED ABOVE 900 C.

Spill Release Procedures:NEUTRALIZE WITH DILUTE ACID.
Neutralizing Agent:NEUTRALIZE WITH DILUTE ACID.

Handling and Storage Precautions:DO NOT STORE WITH ACIDS. STORE ABOVE 8
C.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:NORMAL.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES. .
Other Protective Equipment:SUFFICIENT TO PREVENT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:C2
Boiling Pt:B.P. Text:241F,116C
Vapor Pres:<15 MM HG
Vapor Density:AS HOH
Spec Gravity:1.4
pH:13-14
Evaporation Rate & Reference:<1
Solubility in Water:COMPLETE
Appearance and Odor:WATER-WHITE SOLUTION, ODORLESS.
Percent Volatiles by Volume:80

Stability Indicator/Materials to Avoid:YES
ACIDS WILL RELEASE CO*2.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO*2 AT TEMPERATURES ABOVE 900 C.

Waste Disposal Methods:NEUTRALIZE WITH DILUTE ACID. AVOID SPLATTERING
DUE TO CO*2 FORMATION. FLUSH TO SEWER. FOLLOW ALL LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.