BMCKP - OMEGABOND 200 (PART B/CATALYST)

  • MSDS: BMCKP
  • Manufacturer: OMEGA ENGINEERING INC
  • Product Name: OMEGABOND 200 (PART B/CATALYST)
  • National Stock Number: 8040-00N024209
Product Identification

Product ID:OMEGABOND 200 (PART B/CATALYST)
MSDS Date:05/15/1989
FSC:8040
NIIN:00N024209
Kit Part:Y
MSDS Number: BMCKP

Responsible Party
OMEGA ENGINEERING INC
STAMFORD, CT 06907
US

Emergency Phone: 203-359-1660

Info Phone: 203-359-1660

Cage: 29907

Contractor
OMEGA ENGINEERING INC.
4047 STAMFORD, CT 06907-0047 US

Telephone: 203-359-1660

Cage: 29907

Ingredients

300F

Fraction By Weight: 40-50%


305F

CAS: 85-44-9

RTECS: TI3150000

Fraction By Weight: <5%

OSHA PEL 2 PPM

ACGIH TLV: 1 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CURING AGENTS; (NON-HAZARDOUS CURING AGENTS, PIGMENTS)

Fraction By Weight: 0-50%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WARNING: EXTREME IRRITANT-MAY CAUSE
RESP DMG AT HIGH CONC. INHAL: VAPS MAY CAUSE IRRIT TO RESP TRACT,
AND MAY EXERT NARCOTIC/ANESTHETIC EFFECTS. EYE: SEVERE IRRITATION
UPON DIRECT CONTACT. SKIN: IRRIT ATION UPON DIRECT CONTACT; MAY BE
A MILD SENSIT. INGEST: HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. GIVE ARTF RESP IF NOT BRTHG. GIVE
OXYGEN IF BREATHING DFCLT. GET MD IMMEDIATELY. EYE: IMMEDIATELY
FLUSH WITH WATER FOR AT LEAST 15 MINUTES; GET MD. SKIN: REMOVE
CONTAMINATE D CLOTHING; WASH AFFECTED AREA WITH WATER. INGEST: GET
IMMEDIATE MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:PMCC
Flash Point:310F,154C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HIGH CONCENTRATIONS OF DUST OR VAPOR MAY
CREATE AN EXPLOSIVE MIXTURE IN AIR. TOXIC VAPORS MAY BE EVOLVED
UPON EXPOSURE TO HEAT OR OPEN FLAME.

Accidental Release

Spill Release Procedures:SCRAPE/SHOVEL ABSORBED WASTE & ABSORB IN
CNTNRS. SCRUB AREA W/SOAPY WATER & RINSE. PVNT RINSES FROM ENTERING
DRAINS/OTHER WATERWAYS. SPILLED MATL & WATER RINSES ARE CLASSIFIED
AS CHEM WASTE, AND MUST BE DISPOSED OF I/A/W (SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY PLACE, KEEP REMOVED
FROM ANY HEAT OR OPEN FLAME. KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:KEEP AWAY FROM INTENSE HEAT, OPEN FLAMES.AVOID EYE
AND SKIN CONTACT.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:FLEXIBLE DUCTWORK SHOULD EXTEND TO AREAS OF HIGH CONC TO
PVNT LOC BUILDUP OF VAP. EXPLO-PROOF VENT EQUIP (SUPP DATA)
Protective Gloves:PROTECTIVE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL: CURRENT LOCAL, ST & FEDERAL REGS. VENT: SHOULD BE USED FOR LOCAL
VENTILATION.

Chemical Properties

HCC:N1
Vapor Pres:<1 MMHG
Vapor Density:HVR/AIR
Spec Gravity:1.45
Solubility in Water:SLIGHTLY SOLUBLE
Appearance and Odor:PURPLE PASTE.
Percent Volatiles by Volume:NEGL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ALCOHOLS, ALKALIES OR ALKALI METAL IONS. UNDERGOES
HYDROLYSIS WITH WATER TO FORM ACID.
Stability Condition to Avoid:STORAGE IN OPEN CNTNRS, EXPOS TO HEAT
AND/OR OPEN FLAME, UNCONTROLLED MIXING W/(OR EXPOS TO) INCOMPATIBLE
SUBSTANCES.
Hazardous Decomposition Products:CO, CO*2, NO*X.

Disposal

Waste Disposal Methods:SPILLED MATERIAL & WATER RINSES ARE CLASSIFIED
AS CHEMICAL WASTE, AND MUST BE DISPOSED OF IN ACCORDANCE WITH
CURRENT LOCAL, STATE, AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.