BMFQF - XEA 9376
- MSDS: BMFQF
- Manufacturer: DEXTER CORP
- Product Name: XEA 9376
- National Stock Number: 8040-00N024233
Product Identification
Product ID:XEA 9376
MSDS Date:10/28/1987
FSC:8040
NIIN:00N024233
MSDS Number: BMFQF
Responsible Party
PITTSBURG, CA 94565
US
Emergency Phone: 415-687-4201
Info Phone: 415-687-4201
Preparer: SUZANNE FRANZ
Cage: 57294
Contractor
Telephone: 216-247-5000
Cage: 57294
Ingredients
EPOXY RESIN SYSTEM
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SEVERE EYE IRRITATION AND
POSSIBLE BURNS. MAY CAUSE SKIN IRRITATION AND POSSIBLE ALLERGIC
REACTIONS. PROLONGED AND REPEATED CONTACT MAY CAUSE SENSITIZATION
WHICH WILL RESULT IN ALLERGIC REAC TIONS. EXPOSURE TO EXCESSIVE
VAPORS UPON HEATING MAY CAUSE IRRITATION OF UPPER RESPIRATORY TRACT
AND EYES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SKIN RASH, IRRITATION. EYE AND UPPER
RESPIRATORY TRACT IRRITATION IF EXPOSED TO FUMES OR VAPORS.
First Aid
First Aid:EYE: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN. SKIN:
WASH THOROUGHLY WITH SOAP AND WATER, RUBBING ALCOHOL OR HAND
CLEANER. DO NOT USE SOLVENTS. REMOVE SOILED CLOTHING AND WASH
BEFORE REUSE. IF I RRITATION PERSISTS, SEE PHYS. INHAL:REMOVE TO
FRESH AIR. SUPPORT BRTHG. (GIVE O*2/ARTF RESP) . INGEST: CALL MD
IMMED .
Fire Fighting
Flash Point Method:TOC
Flash Point:>300F,>149C
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, OR WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. STORE @ 0F FOR 3 MONTHS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE. DO NOT HANDLE OR
USE UNTIL MSDS HAS BEEN READ AND UNDERSTOOD. AVOID CONTACT WITH
EYES OR SKIN.
Exposure Controls
Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION;
OTHERWISE, USE NIOSH/MSHA APPROVED ORGANIC CARTRIDGE RESPIRATOR.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS RUBBER OR PLASTIC GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
CNDTNS (POLYM): WITH THE RELEASE OF TOXIC GASES.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<0.01
Vapor Density:NIL
Spec Gravity:>1
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:YELLOW FILM.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Hazardous Decomposition Products:CO, NO*X, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:DO NOT HEAT PROD UNLESS CURING SURF
TO BE BOND. FAILURE TO OBSERVE CAUTION MAY RSLT IN EXCESS HEAT
BUILD-UP (SUPP DATA)
Disposal
Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E. DISPOSE
OF IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.