Product ID:50-114/26 FOAMING COOLING COIL CLEANER
MSDS Date:02/07/1990
FSC:6850
NIIN:00F021014
MSDS Number: BMKVS

MIDCO PRODUCTS CO, INC

11697 FAIRGROVE IND BLVD
MARYLAND HEIGHTS, MO 63043

Emergency Phone: (314) 567-1710

Info Phone: (314) 567-1710

Cage: 0BTA6

MIDCO PRODUCTS CO INC

MARYLAND HEIGHTS, MO 63043 US

Telephone: 314-567-1710

Cage: 0BTA6

ETHYLENE GLYCOL, GLYCOL

CAS: 107-21-1

RTECS: KW2975000

ACGIH TLV: C 127 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

DIETHYLENE GLYCOL ETHYL ETHER, CARBITOL, CARBITOL

CAS: 111-90-0

RTECS: KK8750000

2-BUTOXYETHANOL (ETHYLENEGLYCOL MONOBUTYL ETHER), BUTYL

CAS: 111-76-2

RTECS: KJ8575000

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

ETHANOL (ETHYL ALCOHOL), TECSOL, ALCOHOL

CAS: 64-17-5

RTECS: KQ6300000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM

SODIUM METASILICATE; SODIUM SILICATE; WATER GLASS; DISODIUM

CAS: 6834-92-0

RTECS: VV9275000

ACGIH TLV: 2 MG/CUM

PROPANE

CAS: 74-98-6

RTECS: TX2275000

OSHA PEL 1000 PPM

ACGIH TLV: SIMPLE ASPHYXIANT

ISOBUTANE, 2-METHYLPROPANE

CAS: 75-28-5

RTECS: TZ4300000

OSHA PEL 1800 MG/CUM

ACGIH TLV: 1000 PPM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION, REDNESS & WATERING.
SKIN: ITCHING, DRYNESS, REDNESS & IRRITATION. INHALATION: NASUEA &
DIZZINESS. INGESTION: NAUSEA, HEADACHE & VOMITING.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION, REDNESS & WATERING. SKIN:
ITCHING, DRYNESS, REDNESS & IRRITATION. INHALATION: NAUSEA &
DIZZINESS. INGESTION: NAUSEA, HEADACHE & VOMITING.
Medical Cond Aggravated by Exposure:SENSITIVITY

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION:
DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Extinguishing Media:CO2, STANDARD FOAM, DRY CHEMICAL & HALON
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:TEMPS >120F MAY CAUSE BURSTING OR
VENTING.

Spill Release Procedures:ELIMINATE IGNITION SOURCES. DIKE AREA. SMALL
QUANTITIES MAY BE ABSORBED W/ABSORBENT MATERIALS.

Handling and Storage Precautions:DON'T STORE IN TEMPERATURES GREATER
120F.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:AS REQUIRED.
Ventilation:GENERAL
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health

Vapor Pres:50
Vapor Density:>1
Spec Gravity:1.02
pH:11.8
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE FOAM W/SWEET ODOR

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:CO
Conditions to Avoid Polymerization:OPEN FLAMES

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.