Product ID:ITEM#:R64-1002 EP-L CARTRIDGE (HP PN:92275A)
MSDS Date:03/01/1993
FSC:6850
NIIN:01-321-0640
MSDS Number: BMQQB

CANON U S A INC

ONE CANON PLAZA
LAKE SUCCESS, NY 11040-1113
US

Emergency Phone: 516-488-6700/800-424-9300(CHEMTREC)

Info Phone: 516-488-6700/516-328-5600

Preparer: JOSEPH PALMERI

Cage: 1BA63

DELCO SERVICES INC

704 WAYNE, PA 19087 US

Telephone: 251-964-1060

Cage: 0PVF7

STYRENE ACRYLATE COPLOYMER (TONER)

Fraction By Weight: 55-65%

IRON OXIDE (TONER)

CAS: 1317-61-9

Fraction By Weight: 30-40%

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

MANUFACTURER CONTACT STATES ALL OHTER INFO IS PROPRIETARY.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER POWDER IS NOT ACCESSIBLE UNLESS
CARTRIDGE IS FORCED OR BROKEN INTO.MINIMAL RESPIRATORY TRACT IRRIT
MAY OCCUR AS WITH EXPO TO LARGE AMTS OF ANY DUST.
Explanation of Carcinogenicity:PER MSDS:CONCERNING CARCINOGENICITY
IMFREDS LISTED ARE NOT LISTED ON LATEST NTP/IARC/OSHA.
Effects of Overexposure:MINIMAL RESPIRATORY TRACT IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE FROM EXPO.EYE:NO SPECIFIC HAZA IS KNOWN TO
CANON.HOWEVER ANY MATL THAT CONTACTS EYE MAY BE IRRIT.IN CASE OF
EYE CONTACT FLUSH W/PLENTY OF WATER.IF IRRIT PERSISTS CONTACT
PHYSICIAN.SKIN:WA SH W/SOAP/WATER.

Flash Point:NON-FLAMM SOLID
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:NONE.
Unusual Fire/Explosion Hazard:THIS MATL LIKE MOST ORGANIC MATL IN
POWDER FORM IS CAPABLE OF CREATING A DUST EXPLOSITION. (NON-FLAMM
SOLID ACCORDING TO 16 CFR 1500.44 TEST METHOD).

Spill Release Procedures:SWEEP MATL ONTO PAPER OR COLLECT IT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN.KEEP
FROM CONTACT W/OXIDIZING MATLS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE REQUIRED.
Eye Protection:NONE REQUIRED.
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health

HCC:N1
Boiling Pt:B.P. Text:N/AVAI
Melt/Freeze Pt:M.P/F.P Text:212F,100C
Decomp Temp:Decomp Text:NP
Vapor Pres:NEGLIGIBLE
Vapor Density:NA
Spec Gravity:1.4-1.6
pH:N/DETR
Viscosity:NP
Evaporation Rate & Reference:NEG (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE.
Appearance and Odor:PHOTOSENSITIVE DRUM, TONER, DEVELOOPER UNIT,CHARGE
ROLLER,CLEANER BLADES.
Percent Volatiles by Volume:NEGLIG
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS WITH ANY OTHER ORGANIC MATL
COMBUSTION WILL PRODUCE CARBON DIOXIDE & PROBABLY CARBON MONOXIDE.

Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUE IS REQUIRED.ENSURE
COMPLIANCE WITH FED/STATE &/OR LOC REGS.CARTRIDGE IS COMPOSED OF
PLASTIC & METALS. CERCLA CHEMS:NONE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.