BMQTD - RED GLPT VARNISH 10-9002, 10-9003, 10-9008

  • MSDS: BMQTD
  • Manufacturer: G C ELECTRONICS
  • Product Name: RED GLPT VARNISH 10-9002, 10-9003, 10-9008
  • National Stock Number: 5970-00-901-5331
Product Identification

Product ID:RED GLPT VARNISH 10-9002, 10-9003, 10-9008
MSDS Date:01/01/1987
FSC:5970
NIIN:00-901-5331
MSDS Number: BMQTD

Responsible Party
G. C. ELECTRONICS
1801 MORGAN ST
ROCKFORD, IL 61105-1209
US

Emergency Phone: 815-968-9661

Info Phone: 815-968-9661

Cage: 80112

Contractor
WALLACE-MURRAY CORP,GC ELECTRONICS AUDIOTEX DIV
ROCKFORD, IL 61101-1314 US

Telephone: 815-968-9661

Cage: 15202

Ingredients

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 62%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PIGMENT (IRON OXIDE CAS 8011-97-0)

Fraction By Weight: 36%


AKLYD RESIN

CAS: 68459-31-4

Fraction By Weight: 2%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPORS CAUSE IRRITATION OF EYES, NOSE
& THROAT. IN HIGH CONCENTRATIONS VAPORS ARE ANESTHETIC.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:VAPORS MAY CAUSE NAUSEA, HEADACHE AND VOMITING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:REMOVE TO FRESH AIR, FLUSH SKIN AND EYES WITH WATER. IF
DIFFICULTY BREATHING, GET MEDICAL ATTENTION AT ONCE. IF SWALLOWED,
DO NOT INDUCE VOMITING AND GET MEDICAL ATTENTION IMMEDIATELY.

Fire Fighting

Flash Point Method:COC
Flash Point:82.0F,27.8C
Extinguishing Media:CARBON DIOXIDE, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION AND CLEAN UP
WITH AN ABSORBENT MATERIAL.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED .KEEP AWAY FROM
IGNITION SOURCES. AVOID PROLONGED OR REPEATED BREATHING OF VAPORS
OR CONTACT WITH SKIN.
Other Precautions:NONE

Exposure Controls

Respiratory Protection:IN HIGH CONCENTRATIONS AIR MASK MAY BE REQUIRED.
Ventilation:LOCAL EXHAUST TO PROVIDE ADEQUATE VENTILATION.
Protective Gloves:PLASTIC GLOVES
Eye Protection:SAFETY GLASSES - CHEMICAL SPLASH GOGGLES
Other Protective Equipment:HAVE EMERGENCY EYE WASH AND SAFETY SHOWER
AVAILABLE.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING.
Supplemental Safety and Health

Chemical Properties

HCC:F3
Boiling Pt:=140.6C, 285.F
Vapor Pres:10 MMHG
Vapor Density:3.7 AIR=1
Viscosity:65-85
Solubility in Water:NOT SOLUBLE
Appearance and Odor:RED ENAMEL.

Stability

Stability Indicator/Materials to Avoid:YES
NO
Stability Condition to Avoid:WARM STORAGE--SOURCES OF IGNITION.
Hazardous Decomposition Products:NO

Disposal

Waste Disposal Methods:INCINERATE. DISPOSE OF IN ACCORDANCE WITH
APPLICABLE FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.