BMSQL - X 500 SLOW SAFETY SOL. REDUCER
- MSDS: BMSQL
- Manufacturer: MIDLAND DIV THE DEXTER CORP
- Product Name: X 500 SLOW SAFETY SOL. REDUCER
- National Stock Number: 1610-01-027-4136
Product Identification
Product ID:X 500 SLOW SAFETY SOL. REDUCER
MSDS Date:01/24/1990
FSC:1610
NIIN:01-027-4136
Kit Part:Y
MSDS Number: BMSQL
Responsible Party
HAYWARD, CA 94544
US
Emergency Phone: 415-471-7171 NIGHT 415-796-4972
Info Phone: 415-471-7171 NIGHT 415-796-4972
Preparer: D ELLISON
Cage: 98795
Contractor
Telephone: 510-471-7171
Cage: 98795
Ingredients
ETHYL BENZENE (SARA III) *
CAS: 100-41-4
RTECS: DA0700000
Fraction By Weight: 10-20%
OSHA PEL 100 PPM/125 STEL *
ACGIH TLV: 100 PPM/125STEL 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III) *
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: <10%
OSHA PEL 100 PPM/150 STEL *
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PM ACETATE (VAPOR PRESSURE 3.8 MMHG @ 20C)
CAS: 108-65-6
RTECS: AI8925000
Fraction By Weight: 80-90%
OSHA PEL NOT ESTABLISHEDNOT
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:OVEREXPOSURE BY INHALATION MAY CAUSE
IRRITATION OF THE RESPIRATORY TRACT. EYE AND SKIN IRRITANT.
MATERIALS MAY AFFECT THE FOLLOWING ORGANS: KIDNEYS, RESPIRATORY
TRACT, & LIVER.
Effects of Overexposure:INHALATION MAY CAUSE DIZZINESS, HEADACHE OR
DROWSINESS.
Medical Cond Aggravated by Exposure:NONE
First Aid
First Aid:EYE-FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF RUNNING WATER FOR
15 MINUTES. SKIN-REMOVE CONTAMINATED CLOTHING AND WASH SKIN WITH
SOAP AND WATER. INHALE-REMOVE TO FRESH AIR. INGSTION-DRINK WATER
IF NECE SSARY CONSULT A PHYSICIAN FOR ANY OF THESE CONDITIONS.
Fire Fighting
Flash Point Method:SCC
Flash Point:92.0F,33.3C
Lower Limits:1.00
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL, OR CARBON
DIOXIDE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS, VENTILATE AREA, AND REMOVE WITH INERT ABSORBANT
AND NON SPARKING TOOLS.
Handling
Handling and Storage Precautions:CONTAINERS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES. DO
NOT CUT, BRAZE, WELD WITH OUT NIOSH RESPIRATOR.
Other Precautions:DO NOT TAKE INTERNALLY. MAKE SURE THE DRUM IS
COMPLETELY EMPTY BEFORE ATTEMPTINGTO WELD OR BRAZE. THE DRUM SHOULD
BE INDUSTRIALLY CLEANED PRIOR TO REUSE.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED AIR LINE TYPE
RESPIRATORS OR HOODS FOR ENCLOSED ANDCONFINED AREAS. AIR PURIFYING
RESPIRATORS MAY BE USED FOR OTHER AREAS.
Ventilation:PROVIDE GENERAL DILUTION/LOCAL EXHAUST VENTILATION TO KEEP
TWA/LEL BELOW ACCEPTABLE LIMITS .
Protective Gloves:CHEMICAL RESISTANT GLOVES
Eye Protection:SAFETY GLASSES TO PROTECT FROM SPLASHING
Supplemental Safety and Health
THIS IS PART "C" OF A THREE PART KIT.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:277F,136C
Vapor Density:>AIR
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUME MAY CONTAIN CARBON
MONOXIDE/OXIDES OF NITROGEN. MAY PRODUCE HAZARDOUS FUMES W/HEATED
TO DECOMPOSITION AS IN WELDING
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.