BMVNV - 3-6512, SHEET FED OIL BASE OFFSET INKS

  • MSDS: BMVNV
  • Manufacturer: A B DICK CO
  • Product Name: 3-6512, SHEET FED OIL BASE OFFSET INKS
  • National Stock Number: 7510-00N029037
Product Identification

Product ID:3-6512, SHEET FED OIL BASE OFFSET INKS
MSDS Date:06/02/1989
FSC:7510
NIIN:00N029037
MSDS Number: BMVNV

Responsible Party
A B DICK CO
5700 WEST TOUHY AVENUE
CHICAGO, IL 60648
US

Emergency Phone: 312-763-1900

Info Phone: 312-763-1900

Preparer: KENNETH W. PINTER

Cage: HO951

Contractor
DICK A B CO
CHICAGO, IL 60648 US

Telephone: 312-647-8800

Cage: HO951

Ingredients

DISTILLATES (PETROLEUM), HYDROTREATED MIDDLE; (PETROLEUM

CAS: 64742-46-7

RTECS: JN9379645

Fraction By Weight: 2-6%

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)


ALIPHATIC HYDROCARBON

Fraction By Weight: 18-23%

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST: MAY CAUSE IRRITATION OR
GASTRIC DISTURBANCE. EYES: MAY CAUSE IRRITATION. SKIN: PROLONGED
SKIN CONTACT MAY CAUSE DERMATITIS & LOCAL IRRITATION IN SENSITIVE
INDIVIDUALS. INHAL: MAY CAUSE DIZZ, N AUSEA, PNEUMONIA, AND COMA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EFFECTS OF OVEREXPOSURE: MAY CAUSE SKIN AND EYE
IRRITATION, DIZZINESS AND NAUSEA.
Medical Cond Aggravated by Exposure:SKIN CONDITIONS.

First Aid

First Aid:INGEST: DO NOT INDUCE VOMITING. CONSULT MD. EYES: FLUSH WITH
WATER FOR AT LEAST 15 MINUTES. CONSULT MD. SKIN: WASH WITH SOAP AND
WATER. IF IRRIT PERSISTS, CALL MD. INHAL: REMOVE TO FRESH AIR,
APPLY OX YGEN IF NEEDED.

Fire Fighting

Flash Point Method:TCC
Flash Point:>200F,>93C
Lower Limits:1.1%
Upper Limits:6%
Extinguishing Media:WATER FOG, FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHILE
BURNING.

Accidental Release

Spill Release Procedures:WIPE UP WITH ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. KEEP CONTAINERS AWAY FROM EXCESSIVE HEAT, SPARKS AND OPEN
FLAME.
Other Precautions:FOR INDUSTRIAL USE ONLY.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:MECHANICAL (GENERAL): ACCEPTABLE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:GLOVES, APRONS, BOOTS, IMPERVIOUS CLOTHING
AS NEEDED TO AVOID EXCESSIVE SKIN CONTACT.
Work Hygienic Practices:WASH HANDS AND FACE WITH SOAP AND WATER BEFORE
EATING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Vapor Density:>1
Spec Gravity:1.1 (H20=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:VARIOUS COLORED PASTE W/INK VARNISH ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIAL.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CO, CO2, SMOKE.

Disposal

Waste Disposal Methods:IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS FOR OILY WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.