BNKRD - 315 CERAMIC WALL TILE ADHESIVE

  • MSDS: BNKRD
  • Manufacturer: W W HENRY COMPANY
  • Product Name: 315 CERAMIC WALL TILE ADHESIVE
  • National Stock Number: 8040-00-936-9944
Product Identification

Product ID:315 CERAMIC WALL TILE ADHESIVE
MSDS Date:06/01/1988
FSC:8040
NIIN:00-936-9944
MSDS Number: BNKRD

Responsible Party
W.W. HENRY COMPANY
5608 SOTO ST
HUNTINGTON PARK, CA 90255-2629
US

Emergency Phone: 213-583-4961

Info Phone: 213-583-4961

Cage: FO818

Contractor
W.W. HENRY COMPANY
8 HUNTINGTON PARK, CA 90255 US

Telephone: (213) 583-4961

Cage: FO818

Ingredients

DECANE

CAS: 124-18-5

RTECS: HD6550000

Fraction By Weight: 6-8%


ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1-2%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO INFORMATION GIVEN ON MSDS BY
SUPPLIER
Explanation of Carcinogenicity:NO INFORMATION GIVEN ON MSDS BY SUPPLIER
Effects of Overexposure:NONE KNOWN
Medical Cond Aggravated by Exposure:NONE KNOWN

First Aid

First Aid:IN CASE OF EYE CONTACT, FLUSH EYES WITH WATER FOR FIFTEEN
(15) MINUTES.

Fire Fighting

Flash Point:>200F,>93C
Extinguishing Media:N/A NON-FLAMMABLE WATER EMULSION
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:MFR SAID "NOT APPLICIABLE" IN THIS FIELD.

Accidental Release

Spill Release Procedures:SCOOP MAAATERIAL INTO DOT APPROVED CONTAINER.
REMOVE TO A SAFE PLACE WHERE MATERIAL CAN DRY.
Neutralizing Agent:NO INFORMATION GIVEN ON MSDS BY SUPPLIER

Handling

Handling and Storage Precautions:AVOID EXTREME HEAT OR COLD.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. USE ONLY AS DIRECTED
ON LABEL. CLOSE CONTAINER AFTER EACH USE. DO NOT REUSE CONTAINER.
AVOID SKIN AND EYE CONTACT.

Exposure Controls

Respiratory Protection:NO INFORMATION GIVEN ON MSDS BY SUPPLIER
Ventilation:USE WITH ADEQUATE VENTILATION. OPEN DOORS AND WINDOWS AND
UTILIZE OTHER MEANS TO AASSURE FRESH AIR ENTRY AND EXHAUST.
Protective Gloves:TO PREVENT SKIN CONTACT
Eye Protection:GLASSES TO AVOID SPLASHES
Other Protective Equipment:NONE REQUIRED
Work Hygienic Practices:WASH SKIN THOROUGHLY WITH SOAP AND WATER OR
HAND CLEANER.
Supplemental Safety and Health
A SLIGHT ODOR OF AMMONIA MAY BE PRESENT UNTIL ADHESIVE DRIES.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:210F,99C
Vapor Density:>1
Spec Gravity:1.2
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:HEAVY PASTE
Percent Volatiles by Volume:UNKNON

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:NONE KNOWN
Conditions to Avoid Polymerization:WILL NOT OCCUR

Disposal

Waste Disposal Methods:DISPOSE I/A/W ALL FEDERAL, STATE AND LOCAL
REGULATIONS. DO NOT FLUSH ADHESIVE DOWN DRAIN.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.