BNVRR - CAPASTIC HARDENER
- MSDS: BNVRR
- Manufacturer: ENGELHARD CORP
- Product Name: CAPASTIC HARDENER
- National Stock Number: 8030-00N033425
Product Identification
Product ID:CAPASTIC HARDENER
MSDS Date:11/01/1985
FSC:8030
NIIN:00N033425
Kit Part:Y
MSDS Number: BNVRR
Responsible Party
EDISON, NJ 08818
US
Emergency Phone: 201-632-6414
Info Phone: 201-632-6414
Preparer: R.I. LEIGHTON
Cage: 23036
Contractor
Telephone: 216-292-9200
Cage: 23036
Ingredients
ALIPHATIC AMINE ABDUCT; (ALIPHATIC AMINE ADDUCT)
AROMATIC OIL
5 MG/M3 RDUST;15 TDUST (MFR).
CAS: 112945-52-5
RTECS: VV7310000
OSHA PEL SEE INGREDIENT NAME
ACGIH TLV: SEE INGREDIENT NAME
ASBESTOS; (ASBSESTOS RG-144 FIBERS) (SARA III)
CAS: 1332-21-4
RTECS: CI6425000
Fraction By Weight: <1%
ACGIH TLV: 2 FIBERS/CC
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:HARDENER MAY CAUSE IRRITATION &
ALLERGIC SENSITIZATION TO LUNGS & SKIN. PROLONGED & CONTINUOUS
INHALATION OF DUST GENERATED FROM SANDING, CUTTING OR GRINDING
DRIED, CURED EPOXY SYSTEM MAY CAUSE SEVERE LUNG DAMAGE.
Explanation of Carcinogenicity:ASBESTOS:KNOWN CARCINOGEN (NTP), GROUP 1
(IARC), OSHA REGULATED.
Effects of Overexposure:IRRITATION OR SENSITIZATION OF SKIN OR LUNG.
SHORTNESS OF BREATH OR PNEUMOCONIOSIS FROM PROLONGED EXPOSURE TO
DUST.
Medical Cond Aggravated by Exposure:MAY WORSEN OTHER EXISTING SKIN OR
RESPIRATORY CONDITIONS.
First Aid
First Aid:EYE:FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. GET
MEDICAL HELP. SKIN:WASH EXPOSED AREAS W/SOAP & WATER. REMOVE
CONTAMINATED CLOTHING. INGEST:GIVE 3 GLASSES OF WATER OR MILK.
INDUCE VOMITING. GE T MEDICAL HELP. INHAL:REMOVE TO FRESH AIR. GET
MEDICAL HELP.
Fire Fighting
Flash Point Method:COC
Flash Point:400F,204C
Extinguishing Media:CO*2, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN
Accidental Release
Spill Release Procedures:USE PROTECTIVE CLOTHING & NIOSH/MSHA APPROVED
RESPIRATORY PROTECTION AGAINST LIQUID CONTACT OR INHALATION OF
VAPORS. PROVIDE VENTILATION. PICK UP W/SOLID ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED TOXIC DUST RESPIRATOR
FOR DRIED, CURED EPOXY.
Ventilation:LOCAL EXHAUST &/OR MECHANICAL (GENERAL) VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LONG-SLEEVED WORK CLOTHING, EYE WASH
FOUNTAIN.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Solubility in Water:INSOLUBLE
Appearance and Odor:YELLOW PASTE.
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS, CHLORONATED HYDROCARBONS.
Stability Condition to Avoid:AVOID HIGH & PROLONGED HEATING.
Hazardous Decomposition Products:NONE UNDER NORMAL CONDITIONS.
Disposal
Waste Disposal Methods:DEPOSIT SCRAP IN AN APPROVED LANDFILL I/A/W
FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.