BPKGX - BIG BILL PVC PRIMER/CLEANER

  • MSDS: BPKGX
  • Manufacturer: RECTORSEAL CORP
  • Product Name: BIG BILL PVC PRIMER/CLEANER
  • National Stock Number: 6850-00N032247
Product Identification

Product ID:BIG BILL PVC PRIMER/CLEANER
MSDS Date:06/01/1986
FSC:6850
NIIN:00N032247
MSDS Number: BPKGX

Responsible Party
RECTORSEAL CORP
2830 PRODUCE ROW
HOUSTON, TX 77023
US

Emergency Phone: 713-928-6423

Info Phone: 713-928-6423

Cage: 60150

Contractor
THE RECTORSEAL CORPORATION
HOUSTON, TX 77055 US

Telephone: 800-231-3345

Cage: 60150

Ingredients

2-BUTANONE; (METHYL ETHYL KETONE) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 95%

OSHA PEL 200 PPM;300 STEL

ACGIH TLV: 200 PPM;300 STEL

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


FURAN, TETRAHYDRO-; (TETRAHYDROFURAN) (SARA III)

CAS: 109-99-9

RTECS: LU5950000

Fraction By Weight: 5%

OSHA PEL 200 PPM;250 STEL

ACGIH TLV: 200 PPM;250 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE EXPECTED IF REASONABLE CARE AND
CAUTION EXERCISED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION OF EYES AND NASAL PASSAGES AND
CORNEAL EDEMA. HEADACHE AND NAUSEA MAY DEVELOP AT LEVELS OVER
10,000 PPM.
Medical Cond Aggravated by Exposure:NONE PERCIEVED.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR, ADMINISTER OXYGEN IF BREATHING IS
LABORED. INGEST:INDUCE VOMITING. CALL MD. SKIN:FLUSH WITH WATER FOR
15 MINUTES. CALL MD. EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
CAL L MD.

Fire Fighting

Flash Point Method:TCC
Flash Point:16F,-8.9C
Lower Limits:2%
Upper Limits:10%
Extinguishing Media:WATER, FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FLAMMABLE - LOW FLASH POINT.

Accidental Release

Spill Release Procedures:ADD ABSORBENT TO SPILL AREA. AVOID BREATHING
VAPORS. VENTILATE AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
KEEP AWAY FROM SPARKS AND OPEN FLAME.
Other Precautions:AVOID PROLONGED OR REPEATED CONTACT WITH SKIN OR
CLOTHING.

Exposure Controls

Respiratory Protection:NONE. USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL ROOM VENT USUALLY ADEQUATE. USE LOCAL EXHAUST OR
MECHANICAL (GENERAL) VENTILATION IF TLV IS EXCEEDED.
Protective Gloves:NON-PERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:151F,66C
Vapor Pres:140 @ 68F
Vapor Density:2.5
Spec Gravity:0.8091 (H2O=1)
Evaporation Rate & Reference:3.5 (ETHYL ACETATE = 1)
Solubility in Water:31.5%
Appearance and Odor:CLEAR WITH KETONE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
ALKANOL, AMINES, PYRIDINES, CAUSTICS, INORGANIC ACIDS.
Stability Condition to Avoid:STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:CONTROLLED INCINERATION IN AN APPROVED
COMMERCIAL DISPOSAL UNIT. CONSULT LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.