Product ID:NP-A ANTI-PITTING ADDITIVE
MSDS Date:03/01/1989
FSC:6850
NIIN:00N012592
MSDS Number: BQPJW

Emergency Phone: 216-349-7300

Info Phone: 216-349-7300

Cage: 0FDV7

Telephone: 216-349-7300

Cage: 0FDV7

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN:CAUSES IRRITATION.INGESTION:HARMFUL
IF SWALLOWED.INHALATION:MAY CAUSE IRRITATION OF THE RESPIRATORY
TRACT.
Medical Cond Aggravated by Exposure:MAY AGGRAVATE EXISTING RESPIRATORY
AND/OR SKIN AILMENTS.

First Aid:EYES:IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES.SKIN:FLUSH WITH WATER.CALL A PHYSICIAN.INGESTION:IF
SWALLOWED,INDUCE VOMITING IMMEDIATELY AS DIRECTED BY MEDICAL
PERSONNEL.INHALATIO N:REMOVE TO FRESH AIR.CALL A PHYSICIAN.

Extinguishing Media:WATER,CARBON DIOXIDE OR FOAM.
Fire Fighting Procedures:NONE EXPECTED
Unusual Fire/Explosion Hazard:NOT A FIRE OR EXPLOSION HAZARD.

Spill Release Procedures:CONTAIN SPILL.NEUT BY SMOTHERING W/ EXCESS
LIME/SODA ASH.SCOOP INTO CONTR FOR DISP.NOTIFICATION OF NATL
RESPONSE CENTER (800-424-8802) MAY BE REQD.SEE EPA,DOT & APPLIC
STATE & LOC REGS FOR CURRENT RES PONSE INFO.IT IS REC THAT EACH
USER (SEE SUPP)
Neutralizing Agent:LIME OR SODA ASH.

Handling and Storage Precautions:WASH THOROUGHLY AFTER HANDLING.KEEP
CONTAINER CLOSED.AVOID BREATHING VAPORS OR MISTS AND CONTACT WITH
EYES,SKIN AND CLOTHING.
Other Precautions:N/K

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:GENERAL.LOCAL EXHAUST VENTILATION ONLY IF NEEDED TO CONTROL
MISTING.
Protective Gloves:RUBBER OR NEOPRENE GLOVES.
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:N/K
Work Hygienic Practices:AVOID BRTHG VAPS OR MISTS.AVOID CONT WITH
EYES,SKIN AND CLTHG.USE WITH ADEQ VENT.WASH THORO AFTER HANDLING.
Supplemental Safety and Health
MFR:DIVISION,ADVANCED FINISHING TECHNOLOGIES GROUP.RTE OF ENTRY:EYE
(MFR).SPILL PROC:ESTABLISH A SPILL PREVENTION,CONTROL AND
COUNTERMEASURE PLAN (SPCC).WASTE DISP METH:MATERIALS ARE AMENABLE
TO RECYC LE/REUSE.

HCC:C3
Boiling Pt:B.P. Text: 212F,100C
Decomp Temp:Decomp Text:N/K
Spec Gravity:1.02 (WATER=1)
pH:3-3.5
Solubility in Water:MISCIBLE
Appearance and Odor:CLEAR WATER SOLUTION WITH SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
NONE EXPECTED
Stability Condition to Avoid:NONE EXPECTED
Hazardous Decomposition Products:NONE EXPECTED

Waste Disposal Methods:FED,STATE & LOC DISP LAWS & REGS WILL DETERM
PROPER WASTE DISP PROC.ALL WASTE MATLS SHOULD BE REVIEWED TO DETERM
THE APPLIC HAZ.DISP REQUIREMENTS ARE DEPENDENT ON HAZ
CLASSIFICATION & WILL VARY BY LOC ATION & TYPE OF DISP
SELECTED.SOME WASTE (SEE SUP)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.