Product ID:4043, ALUMINUM WELDING WIRE AND ROD
MSDS Date:06/01/1992
FSC:3439
NIIN:00-268-9654
MSDS Number: BQXSD

UNIBRAZE CORP

7502 W STATE RT 41
COVINGTON, OH 45318-9746
US

Emergency Phone: 513-473-2001

Info Phone: 513-473-2001

Cage: OO525

UNIBRAZE CORP

COVINGTON, NC 28086 US

Telephone: 704-739-6421

Cage: OO525

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 4.5-6%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

IRON

CAS: 6596-57-0

Fraction By Weight: 0.8%

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 0.30%

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.05%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

MAGNESIUM

CAS: 7439-95-4

RTECS: OM2100000

Fraction By Weight: 0.05%

ZINC (SARA III)

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 0.10%

OSHA PEL 10 MG ZNO/M3

ACGIH TLV: 10 MG ZNO/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TITANIUM, METAL

CAS: 7440-32-6

RTECS: XR1700000

Fraction By Weight: 0.20%

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: REM.

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9293

LD50 LC50 Mixture:UNCLASSIFIED WELDING FUMES=5MG/M3 PEL
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:LONG TERM EXPOSURE TO WELDING FUMES,
GASES OR DUST MAY CONTRIBUTE TO PULMONARY IRRITATION OR
PNEUMONOCOSIS. COPPER FUMES MAY CAUSE METAL FUME FEVER. ARC RAYS
FROM ELECTRIC OPERATIONS CAN INJURE EYES & BURN SKIN. ARC RAYS
FROM ELECTRIC OPERATIONS CAN INJURE EYES & BURN SKIN. ELECTRIC
SHOCK FROM ARC WELDING CAN KILL.
Explanation of Carcinogenicity:CHROMIUM SHOULD BE CONSIDERED A POSSIBLE
CARCINOGEN PER OSHA 29CFR 1910.1200.
Effects of Overexposure:SHORT TERM EXPOSURE TO WELDING FUMES MAY RESULT
IN DISCOMFORT, DIZZINESS, NAUSEA, OR DRYNESS OR IRRITATION OF THE
THROAT. METAL FUME FEVER MAY INCLUDE FEVER, BODY ACHE, CHILLS.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH IMPAIRED PULMONARY
FUNCTIONS OR ILLNESS MAY HAVE SYMPTOMS EXACERBATED BY FUME
IRRITANTS.

First Aid:REMOVE FROM DUST OR FUME EXPOSURE. IF BREATHING HAS STOPPED,
PERFORM ARTIFICIAL RESPIRATION. SUMMON MEDICAL AID IMMEDIATELY.

Flash Point:NON-FLAMMABLE
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:WELDING ARC, OPEN FLAME AND SPARKS CAN
IGNITE COMBUSTIBLES. SEE ANSI/ASC Z49.1-1983 SECTION 6.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:PROVIDE PROTECTIVE SCREENS TO SHIELD OTHERS. WHEN
ELECTRODES AND FLUXES ARE CONSUMED, THE FUME AND GAS DECOMPOSITION
PRODUCTS GENERATED ARE DIFFERENT IN FORM FROM THE INGREDIENTS
LISTED. NEW COMPOUNDS NOT IN THE ELECTRODES MAY FORM.

Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN WELDING, BRAZING OR SOLDERING IN CONFINED SPACE OR
WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW
TLV.
Ventilation:USE ENOUGH VENTILATION & LOCAL EXHAUST AT THE FLAME OR ARC
TO KEEP THE FUMES & GASES BELOW THE TLV IN THE WORKERS ZONE.
Protective Gloves:WELDERS LEATHER GLOVES
Eye Protection:OSHA APPROVED GOGGLES/FACE SHIELD W/LENS
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTION, AS WELL AS DARK SUBSTANCIAL CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING OR SMOKING.
LAUNDER CONTAMINATIED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
WELDING AND HOT CUTTING FUMES & GASES CANNOT BE CLASSIFIED SIMPLY.
THEIR COMPOSITION AND QUANTITY ARE DEPENDENT ON THE METAL BEING
WELDED, THE PROCEDURES, PROCESSES AND THE TYPE OF WIRE OR
ELECTRODES USED. OTHER INFLUENCING FACTORS ARE THEPRESENCE OF
CONTAMINANTS. CHLORINATED SOLVENTS MAY DECOMPOSE TO TOXIC GASES.

HCC:N1
Appearance and Odor:SOLID WIRE OR ROD.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING AND BRAZING FUMES AND GASES
CANNOT BE CLASSIFIED SIMPLY. THE COMPOSITION IS DEPENDENT UPON THE
METAL WORKED.

Waste Disposal Methods:NONE SPECIFIED BY MANUFACTURER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.