BQZCN - 04050 ACRYWELD PART B
- MSDS: BQZCN
- Manufacturer: HARDMAN INC
- Product Name: 04050 ACRYWELD PART B
- National Stock Number: 8040-00F027209
Product Identification
Product ID:04050 ACRYWELD PART B
MSDS Date:08/15/1988
FSC:8040
NIIN:00F027209
Kit Part:Y
MSDS Number: BQZCN
Responsible Party
BELLEVILLE, NJ 07109-3328
US
Emergency Phone: 201-751-3000
Info Phone: 201-751-3000
Preparer: NORMAN S WOLFROM
Cage: 96900
Contractor
Telephone: 201-751-3000
Cage: 96900
Ingredients
BENZOYL PEROXIDE, DI-BENZOYLPEROXIDE
CAS: 94-36-0
RTECS: DM8575000
Fraction By Weight: 20-50%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM
DIBUTYL PHTHALATE, DI-N-BUTYL PHTHALATE
CAS: 84-74-2
RTECS: TI0875000
Fraction By Weight: 20-50%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
9.62
RTECS: 9999999WG
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HEADACHES, DIZZINESS,
UNCONSCIOUSNESS.
Explanation of Carcinogenicity:NONE
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN IF BREATHING IS
DIFFICULT. EYES: FLUSH THOROUGHLY W/WATER FOR AT LEAST 15 MINS.
INGESTION: DRINK 1-2 GLASSES OF WATER. DON'T INDUCE VOMITING. SKIN:
WASH TH OROUGHLY W/SOAP & WATER. OBTAIN MEDICALATTENTION IN ALL
CASES.
Fire Fighting
Flash Point:200F
Extinguishing Media:DRY CHEMICAL, FOAM, CO2
Fire Fighting Procedures:USE FULL PROTECTIVE CLOTHING & A POSITIVE
PRESSURE SCBA.
Accidental Release
Spill Release Procedures:CONTAIN & REMOVE W/INERT ABSORBENT &
NON-SPARKING TOOLS.
Exposure Controls
Respiratory Protection:IN THE ABSENCE OF PROPER ENVIRONMENTAL CONTROL
OR VENTILATION, THEN A POSITIVE-PRESSURE BREATHING APPARATUS OR
FULL FACE RESPIRATOR W/AN APPROVED CANISTER IS RECOMMENDED.
Ventilation:LOCAL EXHAUST
Protective Gloves:NITRILE RUBBER, IMPERVIOUS
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:200F
Vapor Density:>1
Appearance and Odor:LIQUID
Percent Volatiles by Volume:0%
Stability
Stability Indicator/Materials to Avoid:YES
REDUCING AGENTS SUCH AS SULFIDES, POLYMERIZABLE MATERIALS
Stability Condition to Avoid:HEAT, OPEN FLAME
Hazardous Decomposition Products:CO, CO2
Disposal
Waste Disposal Methods:INCINERATE OR BURY IN LEGAL LANDFILL IN
ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.