Product ID:893 RECOAT SEALER
MSDS Date:04/01/1991
FSC:8010
NIIN:00F028023
MSDS Number: BRBKB

ACME AUTOMOTIVE FINISHES

101 PROSPECT AVE NW
CLEVELAND, OH 44115
US

Emergency Phone: 216-566-2917

Info Phone: 216-566-2902

Cage: ACMEA

ACME AUTOMOTIVE FINISHES

CLEVELAND, OH 44115 US

Telephone: 216-566-2917

Cage: ACMEA

ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 88%

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM

6.79 LBS.

RTECS: 9999999WG

TOTAL VOC & VOC LESS WATER & EXEMPT

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY TRACT
IRRITATION. NERVOUS SYSTEM DEPRESSION, UNCONSCIOUSNESS & POSSIBLY
DEATH. EYES/SKIN: REDNESS & ITCHING OR BURNING SENSATION. MAY BE
ABSORBED THROUGH THE SKIN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHE, DIZZINESS, NAUSEA, LOSS
OF COORDINATION.

First Aid:INHALATION: REMOVE TO FRESH AIR. IMMEDIATELY GET MEDICAL
ATTENTION. SKIN: WASH AFFECTED AREA THOROUGHLY W/SOAP & WATER.
EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINS.
INGESTION: OBTAIN MED ICAL ATTENTION IN ALL CASES.

Flash Point:45F
Lower Limits:0.5%
Upper Limits:6.7%
Extinguishing Media:CO2, DRY CHEMICAL FOAM
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT. SCBA SHOULD BE
USED. WATER SPRAY MAY BE INEFFECTIVE. WATER MAY USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILD UP.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. APPLICATION TO HOT SURFACES REQUIRES
SPECIAL PRECAUTIONS.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE &
REMOVE W/INERT ABSORBENT.

Handling and Storage Precautions:USE ADEQUATE VENTILATION. KEEP AWAY
FROM HEAT, SPARKS, OPEN FLAME. KEEP CONTAINER CLOSED WHEN NOT IN
USE. CONSULT NFPA CODE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. DON'T TAKE INTERNALLY.
DON'T SMOKE. EXTINGUISH ALL SOURCES OF IGNITION. TRANSFER ONLY TO
APROVED CONTAINERS W/LABELING. USE APPROVED BONDING & GROUNDING
PROCEDURES.

Respiratory Protection:WEAR AN ORGANIC VAPOR/PARTICULATE RESPIRATOR
APPROVED BY NIOSH/MSHA FOR PROTECTION AGAINST MATERIALS. WHEN
SANDING/WIREBRUSHING/ABRADING/BURNING/WELDING THE DRIED FILM, USE A
PARTICULATE RESPIRATOR AP PROVED BY NIOSH/MSHA.
Ventilation:LOCAL EXHAUST: PERFERABLE. GENERAL EXHAUST: ACCEPTABLE.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES W/UNPERFORATED SIDESHIELD
Work Hygienic Practices:REMOVE & WASH CONTAMINATED CLOTHES BEFORE
REUSE. WASH HANDS THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
INTENTIONAL MISUSE BY DELIBERATELY & INHALAING THE CONTENTS CAN BE
HARMFUL OR FATAL. SANDING & ABRADING OF THE DRIED FILM MAY PRESENT
HAZARDOUS LEVELS OF NUISANCE PARTICULATES.

Boiling Pt:B.P. Text:174-395F
Vapor Density:>1
Spec Gravity:0.90-1.14
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:55-65

Stability Indicator/Materials to Avoid:YES
METALLICS, ALUMINUM, ACIDS, ALKALIS & WATER
Stability Condition to Avoid:SPARKS, OPEN FLAME, HEAT
Hazardous Decomposition Products:CO, CO2, OXIDES OF METAL, HYDROGEN GAS

Waste Disposal Methods:WASTE FROM THIS PRODUCT MAY BE HAZARDOUS AS
DEFINED UNDER RCRA. 40 CFR 261. WASTE MUST BE TESTED FOR
IGNITABILITY TO DETERMINE THE APPLICABLE EPA HAZARDOUS WASTE
NUMBERS. INCINERATE IN APPROVED FACILI TY. FLAMMABLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.