Product ID:99 HARDENER
MSDS Date:12/01/1986
FSC:8040
NIIN:00F028339
Kit Part:Y
MSDS Number: BRBVZ

TECHNO ADHESIVES CO

12113 MOSTELLER ROAD
CINCINNATI, OH 45241
US

Emergency Phone: 513-771-1584

Info Phone: 513-771-1584

Cage: GO228

TECHNO ADHESIVES CO

CINCINNATI, OH 45241 US

Telephone: 513-771-1584

Cage: GO228

8.15

RTECS: 9999999WG

POLYETHYLENE POLYAMINE

POLYETHYLENE POLYAMINE ADDUCT

EPOXY

FATTY ACID

DIETHYLENETRIAMINE, ETHYLENEDIAMINE, N-(2-AMINOETHYL)

CAS: 111-40-0

RTECS: IE1225000

OSHA PEL 1 PPM (SKIN)

ACGIH TLV: 1 PPM (SKIN)

TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: <10%

TETRAETHYLENEPENTAMINE

CAS: 112-57-2

RTECS: KH8585000

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY IRRITATION.
SKIN: IRRITATION & SENSITIZATION. INGESTION: IRRITATION.
Explanation of Carcinogenicity:NONE

First Aid:EYES/SKIN: FLUSH W/PLENTY OF WATER ON CONTACT. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Flash Point:>200F
Lower Limits:1.4%
Extinguishing Media:WATER SPRAY,DRY CHEMICAL,FOAM OR CO2. TREAT AS
CLASS E
Fire Fighting Procedures:WATER TO KEEP FIRE-EXPOSED CONTAINERS COOL. IF
SPILLED,USE WATER SPRAY TO DISPERSE VAPORS. SUGGEST
GOGGLES/BREATHING APPARATUS

Spill Release Procedures:ELIMINATE IGNITION SOURCES. DIKE SPILL TO
MINIMIZE CONTAMINATION. COMPLETELY ABSORB W/INERT MATERIAL,SWEEP OR
SCOOP UP & DISPOSE. FLUSH AREA IMMEDIATELY W/PLENTY OF WATER;
REMOVE FROM WATER ENTRY.

Handling and Storage Precautions:AVOID CONTACT W/SKIN.
Other Precautions:THIS PRODUCT CAN BE CLASSIFIED AS CLASS 5-EXTREMELY
IRRITATING.

Respiratory Protection:USE W/NEEDED VENTILATION. NIOSH APPROVED
RESPIRATORS WHERE NEEDED.
Ventilation:LOCAL EXHAUST: RECOMMENDED WHEN NEEDED.
MECHANICAL(GENERAL):MAY NOT BE ADEQUATE AS SOLE MEANS
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:COVERALLS, APRON & RUBBER FOOT COVERING.
SAFETY SHOWER & EYEWASH
Supplemental Safety and Health

Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN BU AC
Solubility in Water:SLIGHT
Appearance and Odor:AMBER COLORED VISCOUS LIQUID W/AMINE ODOR

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, EPOXY RESINS
Stability Condition to Avoid:EXCESSIVE HEAT, & OTHER IGNITION SOURCES.
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN LANDFILL IN
ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS. U.S. EPA DOESN'T
DEFINE PRODUCT AS HAZARDOUS WASTE BY RCRA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.