Product ID:PAX PURGING COMPOUND, 5900142
MSDS Date:05/29/1992
FSC:6850
NIIN:LLLT32986
MSDS Number: BRKVR

Emergency Phone: 800-274-5263

Info Phone: 614-889-3333

Cage: DO048

Telephone: 800-622-6846

Cage: 81355

POLYETHYLENE

CAS: 9002-88-4

RTECS: TQ3325000

Fraction By Weight: 100%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACT WITH MOLTEN MATERIAL
MAY CAUSE THERMAL BURNS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: SHOULD MOLTEN MATERIAL STRIKE SKIN, IMMEDIATELY FLUSH
WITH COLD WATER TO COOL AND SOLIDIFY MATERIAL. GET IMMEDIATE
MEDICAL ATTENTION. INHALATION: REMOVE FROM EXPOSURE. SUPPORT
BREATHING (GIVE AR TIFICIAL RESPIRATION/OXYGEN) . INGESTION: CALL
MD IMMEDIATELY . EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES .

Extinguishing Media:REGULAR FOAM, WATER FOG, CARBON DIOXIDE OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER MAY BE USED TO KEEP FIRE-EXPOSED
CONTAINERS COOL UNTIL FIRE IS OUT.
Unusual Fire/Explosion Hazard:DUST MAY BE AN EXPLOSION HAZARD.

Spill Release Procedures:SMALL SPILL: SWEEP UP MATERIAL FOR DISPOSAL OR
RECOVERY. LARGE SPILL: SHOVEL MATERIAL INTO CONTAINERS. THOROUGHLY
SWEEP AREA OF SPILL TO CLEAN UP ANY RESIDUAL MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:CNTNRS OF MATL MAY BE HAZ WHEN
EMPTIED.SINCE EMPTIED CNTNRS RETAIN PROD RESIDUES (VAPOR, LIQ,&/OR
SOLID),ALL HAZ PRECS GIVEN IN MSDS MUST BE OBSERVED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE.
WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE. GEN VENT SUFF
TO KEEP AIRBORNE CONC BELOW CURRENT EXPOSURE LIMITS .
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS AND LEGS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Appearance and Odor:SOLID.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS: CARBON
DIOXIDE AND CARBON MONOXIDE, ETC.

Waste Disposal Methods:SMALL SPILL: DISPOSE OF IN ACCORDANCE WITH ALL
LOCAL, STATE AND FEDERAL REGULATIONS. LARGE SPILL: DEPOSIT IN
LANDFILL IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.