Product ID:OATEY 50/50 SOLID WIRE SOLDER
MSDS Date:01/12/1987
FSC:3439
NIIN:00-239-8505
MSDS Number: BRQMX

OATEY COMPANY

4700 W 160TH ST
CLEVELAND, OH 44135-2632
US

Emergency Phone: 303-623-5716

Info Phone: 216-267-7100

Preparer: PAUL E NATON

Cage: EO573

OATEY COMPANY

35906 CLEVELAND, OH 44135-2632 US

Telephone: 216-267-7100

Cage: EO573

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 50%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9293

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 50%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES: FUMES MAY CAUSE IRRITATION.
SKIN: FUMES MAY CAUSE IRRITATION. INHALATION: IF HEATED, FUMES MAY
PRODUCE RESPIRATORY IRRITATION, FEVER, CHILLS, MUSCULAR PAIN,
VOMITING AND SWEATING. CHRONIC INHALA TION OF HEATED FUMES CAUSE
BRAIN, LIVEROR KIDNEY DAMAGE. INGESTION: MAY CAUSE ABDOMINAL PAIN,
GASTROINTESTINAL IRRITANT
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:INHALATION/INGESTION: BRAIN, LIVER, KIDNEY,
REPRODUCTIVE, LUNG DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: MOVE TO FRESH AIR AND IRRIGATE EYES WITH WATER FOR 15
MINUTES. IF IRRITATION PERSISTS, SEEK MEDICAL ATTENTION. SKIN: IF
IRRITATION ARISES, WASH THOROUGHLY WITH SOAP AND WATER. IF
IRRITATION PERS ISTS, SEEK MEDICAL ATTENTION. INHALATION: MOVE TO
FRESH AIR. CALL A POISON CONTROL CENTER OR PHYSICIAN IMMEDIATELY.
INGESTION: DRINK WATER, CALL A PHYSICIAN IMMEDIATELY.

Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, WATER OR FOAM
EXTINGUISHER.
Fire Fighting Procedures:FOR LARGE FIRES: EVACUATE AREA AND CALL FIRE
DEPARTMENT IMMEDIATELY.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:VACUUM IF POSSIBLE. IF FUMES OR DUST EXIST,
WEAR APPROVED RESPIRATORY PROTECTION. PLACE ALL MATERIAL IN CLOSED
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:RESPIRATORY PROTECTION IS REQUIRED FOR
MELTING, GRINDING, DROSSING AND SOLDERING WHERE AIRBORNE LEAD
EXPOSURE ARE IN EXCESS OF PEL LIMITS.
Other Precautions:PRACTICE GOOD PERSONAL HYGIENE AND HOUSEKEEPING.

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR FOR TOXIC
DUST/FUMES
Ventilation:MECHANICAL (GENERAL): IF WORKING IN CONFINED AREA TO REMOVE
FUMES. LOCAL EXHAUST: OPEN DOORS AND WINDOWS TO REMOVE FUMES
Protective Gloves:DISPOSABLE CLOTH (NEVER RE-USE)
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS
Other Protective Equipment:REMOVE ALL WORK CLOTHES IF EXPOSURE EXCEEDS
PEL LEVEL.
Work Hygienic Practices:PRACTICE GOOD PERSONAL HYGIENE AND
HOUSEKEEPING.
Supplemental Safety and Health
NONE

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:361F,183C
Spec Gravity:9-11.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SILVER-GRAY WIRE METAL

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:LEAD FUMES ABOVE MELTING POINT

Waste Disposal Methods:NONE SPECIFIED BY MANUFACTURER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.