Product ID:FAST DRY TRAFFIC WHITE #3
MSDS Date:03/25/1987
FSC:8010
NIIN:00F029082
MSDS Number: BRVLW

WELLBORN PAINT MFG CO

215 ROSSMOOR RD SW
ALBUQUERQUE, NM 87105
US

Emergency Phone: 505-877-5050

Info Phone: 505-877-5050

Cage: 60378

WELLBORN PAINT MFG CO

ALBUQUERQUE, NM 87105 US

Telephone: 505-877-5050

Cage: 60378

BENZIN, NAPHTHA, MINERAL SPIRITS, PETROLEUM NAPHTHA

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 7.4%

OSHA PEL 500 PPM

ACGIH TLV: 300 PPM

XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: .2%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

2-BUTANONE (METHYL ETHYL KETONE) (MEK)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 7.4%

OSHA PEL 200 PPM

ACGIH TLV: 590 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

CARBON TETRACHLORIDE

CAS: 56-23-5

RTECS: FG4900000

Fraction By Weight: .4%

OSHA PEL 10 PPM

ACGIH TLV: S,5PPM/10 STEL,A3 93

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS

ALMIDAYOLINE ACETATE

Fraction By Weight: .1%

TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 9.2%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

ALUMINUM OXIDE, BAUXITE, ALUMINA, DIALUMINUM TRIOXIDE

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight: 1.0%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

SILICON DIOXIDE, CELITE 322

CAS: 7631-86-9

RTECS: VV3100000

Fraction By Weight: 1.3%

OSHA PEL 80 MG/CUM

ACGIH TLV: 0.2 MG/CUM

12.13

RTECS: 9999999WG

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: CENTRAL NERVOUS SYSTEM
DEPRESSION. SKIN: SLIGHT IRRITANT TO DERMATITIS. EYES: SLIGHT
IRRITANT TO BURNS/CONJUNCTIVITIS. INGESTION: ASPIRATION HAZARD,
PULMONARY EDEMA/HEMORRAGE. OVEREXPOSURE TO SOLVENTS MAY CAUSE
PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION TO NOSE, THROAT &
RESPIRATORY TRACT, HEADACHE, DIZZINESS, NAUSEA, LOSS OF
CONSCIOUSNESS OR COMA. SKIN: IRRITANT, DEFATTING, DRYING. EYES:
IRRITATION.

First Aid:INHALATION: REMOVE TO FRESH AIR. PROVIDE OXYGEN IF BREATHING
IS DIFFICULT. IF NOT BREATHING GIVE ARTIFICIAL RESPIRATION.
EYES/SKIN: FLUSH W/WATER FOR 15 MIN. INGESTION: DON'T INDUCE
VOMITING. IF VOMIT ING OCCURS KEEP HEAD BELOW HIPS TO PREVENT
ASPIRATION. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:22.0F
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL OR SAND
Fire Fighting Procedures:WEAR PROTECTIVE EQUIP. & SCBA. WATER SPRAY BE
INEFFECTIVE; IF USED FOG NOZZLES ARE PREFERABLE. WATER MAY BE USED
TO COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. COMBUSTION FROM HEAT/OPEN FLAME WILL
PRODUCE HIGHLY TOXIC FUMES OF PHOSGENE & HYDROGEN CHLORIDE.

Spill Release Procedures:MAINTAIN PROPER VENTILATION. ELIMINATE
IGNITION SOURCES. DIKE & CONTAIN SPILL W/INERT MATERIAL & TRANSFER
THE LIQUID TO CONTAINERS FOR RECOVERY & DISPOSAL.

Handling and Storage Precautions:STORE AWAY FROM OXIDIZING MATERIALS IN
A COOL, DRY PLACE W/ADEQUATE VENTILATION. KEEP AWAY FROM HEAT &
OPEN FLAMES. DON'T GET IN EYES.
Other Precautions:AVOID SKIN CONTACT. PREVENT PROLONGED OR REPEATED
BREATHING OF VAPOR OR SPRAY MIST. KEEP CONTAINERS TIGHTLY CLOSED.

Respiratory Protection:USE A NIOSH APPROVED RESPIRATOR TO PREVENT
OVEREXPOSURE. USE EITHER AN ATMOSPHERE SUPPLYING RESPIRATOR OR A
FULL FACE RESPIRATOR W/ORGANIC &/OR DUST CARTRIDGE.
Ventilation:REGULATE AIR SUPPLY IN VOLUME & PATTERN TO INSURE FRESH OR
PURIFIED FILTERED AIR TO THE WORK AREA.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL GOGGLES/SAFETY GLASSES
Other Protective Equipment:PROTECTIVE CLOTHING
Supplemental Safety and Health

Boiling Pt:B.P. Text:94.0-305.0F
Vapor Density:>1
Evaporation Rate & Reference:FASTER THAN BU/AC
Percent Volatiles by Volume:51.2

Stability Indicator/Materials to Avoid:YES
CHLORINE, OXYGEN, OR NITRIC, SULFURIC ACIDS & STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, OPEN FLAME & HIGH HUMIDITIES.
Hazardous Decomposition Products:CO, UNIDENTIFIED ORGANIC COMPOUNDS,
PHOSGENE & HYDROGEN CHLORIDE.

Waste Disposal Methods:INCINERATE OR LANDFILL LIQUID & CONTAMINATED
DIKING MATERIAL IN ACCORDANCE W/LOCAL, FEDERAL, & STATE
REGULATIONS. KEEP SPILL OUT OF SEWERS & OPEN BODIES OF WATER.
HANDLING EQUIPMENT MUST BE GROUNDED T O PREVENT SPARKING.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.