BRVQB - GE012

  • MSDS: BRVQB
  • Manufacturer: G E CO SILICONE
  • Product Name: GE012
  • National Stock Number: 8030-00F029148
Product Identification

Product ID:GE012
MSDS Date:03/05/1991
FSC:8030
NIIN:00F029148
MSDS Number: BRVQB

Responsible Party
G E CO SILICONE
260 HUDSON RIVER RD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330/518-266-2641

Info Phone: 518-237-3330/518-266-2641

Preparer: DA POLSINELLI

Cage: FO099

Contractor
GENERAL ELECTRIC CO, SILICONE PRODUCTS BUSINESS DEPT
WATERFORD, NY 12188 US

Telephone: 518-237-3330/800-332-3390

Cage: 01139

Ingredients

TRADE SECRET COMPONENT

Fraction By Weight: 5-10%


TRADE SECRET COMPONENT

Fraction By Weight: 10-30%

OSHA PEL 10 MG/CUM

ACGIH TLV: 15 MG/CUM


SILOXANES & SILICONES DI-ME HYDROY-TERMINATED *92-3*

CAS: 70131-67-8

Fraction By Weight: 60-80%


METHYLTRIACETOXYSILANE, ALKYL TRIACETOXY SILANE

CAS: 4253-34-3

RTECS: VV4500000

Fraction By Weight: 1-5%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT): 25,000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF SWALLOWED. UNCURED PRODUCT
CONTACT IRRITATES LIPS, GUMS, TONGUE, SKIN, EYES, MOUTH, NOSE,
THROAT. MODERATE RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:MOUTH, NOSE, THROAT, LIPS, GUMS, TONGUE, SKIN,
RESKPIRATORY TRACT, EYES IRRITATION.

First Aid

First Aid:SKIN: REMOVE COMPLETELY W/DRY CLOTH OR PAPER TOWEL, BEFORE
WASHING W/DETERGENT & WATER. INHALATION: REMOVE TO FRESH AIR. EYES:
FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:210F, 98.9C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA

Accidental Release

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL &
PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES W/DETERGENT
& WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER PROTECTIVE EQUIPMENT
AS SPECIFIED IN PR OTECTIVE EQUIPMENT SECTION.

Handling

Handling and Storage Precautions:USE ONLY IN WELL VENTILATED AREA.
REMOVE CONTACT LENSES BEFORE USING SEALANT. PRODUCT RELEASES ACETIC
ACID DURING APPLICATION & CURING.
Other Precautions:DON'T HANDLE LENSES UNTIL ALL SEALANT HAS BEEN
CLEANED FROM FINGERTIPS, NAILS, & CUTICLES. RESIDUAL SEALANT MAY
REMAIN ON FINGERS FOR SEVERAL DAYS & TRANSFER TO LENSES CAUSING
SEVERE EYE IRRITATION. A VOID CONTACT W/SKIN & EYES.

Exposure Controls

Ventilation:MECHANICAL TO STAY BELOW TLV OF 10 PPM ACETIC ACID
Protective Gloves:CLOTH
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYEWASH STATIONS
Work Hygienic Practices:DON'T WEAR CONTACT LENSES. WASH AFTER HANDLING.
Supplemental Safety and Health
ODOR THRESHOLD: 1.0 PPM. SENSITIVITY TO STATIC DISCHARGE IS NOT
EXPECTED.

Chemical Properties

Spec Gravity:1.1
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSLUCENT PASTE W/ACETIC ACID ODOR
Percent Volatiles by Volume:<5

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:SILICON DIOXIDE & ACETIC ACID

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.