Product ID:TT-P-1952B YELLOW P/C 184601
MSDS Date:04/28/1988
FSC:8010
NIIN:01-019-1776
MSDS Number: BSGGF

WELLBORN PAINT MFG CO

215 ROSSMOOR RD
ALBUQUERQUE, NM 87012
US

Emergency Phone: 505-877-5050/505-843-2551

Info Phone: 505-877-5050

Cage: WELLB

WELLBORN PAINT MFG CO

ALBUQUERQUE, NM 87012 US

Telephone: 505-877-5050

Cage: WELLB

FORMALDEHYDE (SARA III) (VAPOR PRESSURE 17.00 MM HG @ 68F)

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: TRACE

ACGIH TLV: 2 PPM

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

LEAD (AS PB) (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 10.3%

ACGIH TLV: 0.15 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

CHROMIUM (AS CR) (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 2.4%

ACGIH TLV: 0.05 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

SILICA-CRYSTALLINE

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 8.6%

ACGIH TLV: 0.1 MG/M3

CALCIUM CARBONATE (NUISANCE DUST)

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 34.5%

ACGIH TLV: 10 MG/M3

AMMONIUM

CAS: 1336-21-6

RTECS: BQ9625000

Fraction By Weight: TRACE

ACGIH TLV: 25 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ETHYLENE GLYCOL (SARA III) (VAPOR PRESSURE .10 MM HG @

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 2.2%

ACGIH TLV: 100 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TEXANOL (VAPOR PRESSURE 1.00 MM HG @ 68F) (LEL 0.6)

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 0.7%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:INHALATION: VAPOR OR MIST MAY IRRITATE
EYES, NOSE, THROAT, MUCOUS MEMBRANES PRODUCING DIZZINESS,
HEADACHES, NAUSEA IN POORLY VENTILATED AREAS. SKIN:
PROLONGED/REPEATED: SKIN IRRITATION. EYE: IRRITATIO N.
Explanation of Carcinogenicity:FORMALDEHYDE AND CHROMIUM ARE SUSPECTED
CARCINOGENS.
Effects of Overexposure:CHRONIC: INHALATION MAY HAVE AN EFFECT ON
CENTRAL NERVOUS SYSTEM. MAY CAUSE DIZZINESS OR NARCOSIS. EXCESSIVE
CHRONIC, LONG TERM EXPOSURE TO LEAD MAY CAUSE METALLIC TASTE IN
MOUTH, LOSS OF APPETITE, IN DIGESTION, NAUSEA, SLEEPLESSNESS,
WEAKNESS, STUPOR, COMA, ENCEPHALOPATHY.

First Aid:INHALATION: REMOVE TO FRESH AIR. CONSULT PHYSICIAN. SPLASH
(EYES): FLUSH WITH WATER FOR 15 MIN. SPLASH (SKIN): WASH WITH SOAP
AND WATER. REMOVE & WASH CLOTHING. INGESTION: IF VICTIM IS
CONSCIOUS, GIVE 529 GLASSES OF WATER TO DRINK. DO NOT INDUCE
VOMITING. CALL A PHYSICIAN.

Flash Point:NOT REGULATED
Extinguishing Media:NON COMBUSTIBLE
Fire Fighting Procedures:LATEX COATINGS WILL NOT BURN. THEY MAY SPATTER
IF TEMP EXCEEDS BOILING POINT. DRY FILMS ARE CAPABLE OF BURNING.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE WHEN
EXPOSED TO EXTREME HEAT. KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT AND OPEN FLAME.

Spill Release Procedures:DIKE AND CONTAIN SPILL WITH INERT MATERIAL &
TRANSFER THE LIQUID TO CONTAINERS FOR RECOVERY AND DISPOSAL. KEEP
SPILL OUT OF SEWERS AND OPEN BODIES OF WATER.

Handling and Storage Precautions:KEEP FROM FREEZING. DO NOT TAKE
INTERNALLY. AVOID PROLONGED CONTACT OR INHALATION.

Respiratory Protection:WEAR APPROVED ORGANIC VAPOR RESPIRATOR UNLESS
VENTILATION EQUIPMENT IS ADEQUATE TO KEEP AIRBORNE CONCENTRATIONS
BELOW THE EXPOSURE STANDARDS.
Ventilation:GENERAL MECHANICAL VENT MAY BE SUFFICIENT TO KEEP PRODUCE
CONCENTRATIONS BELOW TLV, IF INADEQUATE USE LOCAL EXHAUST.
Protective Gloves:USE IMPERMEABLE SOLVENT RESISTANT GLOVES
Eye Protection:SFTY GOGGLES,CHEM SFTY GLASSES,FACESHLD
Other Protective Equipment:IMPERMEABLE APRONS AND PROTECTIVE CLOTHING
WHEN WORKING W/PRODUCT. USE OF HEADCAPS RECOMMENDED WHENEVER
POSSIBLE.
Work Hygienic Practices:EYE WASHING AND SAFETY SHOWERS IN WORKPLACE ARE
RECOMMENDED.
Supplemental Safety and Health

HCC:T6
Boiling Pt:B.P. Text:212F,100C
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN N-BU/AC
Percent Volatiles by Volume:65.5

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH TEMPERATURES OR HIGH HUMIDITIES.
Hazardous Decomposition Products:IF HEATED TO DECOMPOSITION, THIS
PRODUCT WILL EMIT TOXIC FUMES OF LEAD
Conditions to Avoid Polymerization:HIGH TEMPERATURES OR HIGH HUMIDITIES

Waste Disposal Methods:INCINERATE OR LANDFILL AND CONTAMINATED DIKING
MATERIAL, ACORDING TO LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.