Product ID:TM-35 PART A EPOXY
MSDS Date:04/14/1987
FSC:5610
NIIN:00N040886
Kit Part:Y
MSDS Number: BSGTS

WESTPAC PRODUCTS CO INC

106 HEGENBERGER LOOP
OAKLAND, CA 94621
US

Emergency Phone: 415-632-3778

Info Phone: 415-632-3778

Cage: 4Z694

WESTPAC PRODUCTS CO INC

OAKLAND, CA 94621-1326 US

Cage: 4Z694

LIQUID EPOXY

Fraction By Weight: 69%

CHLORINATED FIRE RETARDANT

Fraction By Weight: 21%

ZINC BORATE (SARA III)

CAS: 1332-07-6

Fraction By Weight: 10%

OSHA PEL 10 MG/M3 (ZNO)

ACGIH TLV: 10 MG/M3 (ZNO)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:LD50 (ORAL,RAT): 4500 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED CONTACT MAY CAUSE SKIN OR
EYE IRRITATION/SENSITIZATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: WASH IMMEDIATELY WITH SOAP AND WATER FOR 15 MINUTES AND
SEEK MEDICAL ATTENTION. WASH CLOTHES BEFORE REUSE. EYE: FLUSH WITH
WATER FOR AT LEAST 15 MINUTES . INHALATION: REMOVE FROM EXPOSURE.
SUPPORT BREATHING (GIVE ARTIFICIAL RESPIRATION/OXYGEN) . INGESTION:
CALL MD IMMEDIATELY .

Flash Point Method:CC
Flash Point:340F,171C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS. AVOID OPEN FLAME AND
ELECTRICAL PARTS.

Spill Release Procedures:ABSORB WITH INERT MATERIAL. SWEEP OR SCOOP UP
AND PUT IN DISPOSAL CONTAINER. FLUSH AREA WITH WATER; PREVENT
WASHINGS FROM ENTERING WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:USE ONLY WITH ADEQUATE VENTILATION.
Other Precautions:AVOID BREATHING VAPOR, MIST OR SPRAY. AVOID CONTACT
WITH EYES, SKIN AND CLOTHING. WASH AFTER HANDLING. FOR INDUSTRIAL
USE ONLY.

Respiratory Protection:IN CONFINED AREAS, USE NIOSH/MSHA APPROVED
RESPIRATOR.
Ventilation:LOCAL EXHAUST PREFERABLE. MECHANICAL IS ACCEPTABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APRV CHEMICAL WORKERS GOGGLES (FP N
Other Protective Equipment:ADEQUATE CLOTHING TO PROTECT SKIN.
Work Hygienic Practices:WASH AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Spec Gravity:1.126 (H*2O=1)
Evaporation Rate & Reference:<1
Solubility in Water:INSOLUBLE
Appearance and Odor:LOW VISCOSITY, MILKY WHITE LIQUID, MILD ODOR.
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
AMINES, STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:AMINES, STRONG OXIDIZING AGENTS.

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN A LANDFILL IN
ACCORDANCE WITH APPROVED FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.