Product ID:TM-35 PART B
MSDS Date:06/11/1987
FSC:5610
NIIN:00N040886
Kit Part:Y
MSDS Number: BSGTT

Emergency Phone: 415-632-3778

Info Phone: 415-632-3778

Cage: 4Z694

Cage: 4Z694

MODIFIED ALIPHATIC AMINES

Fraction By Weight: 100%

LD50 LC50 Mixture:LD50 (ORAL,RAT): 4500 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED CONTACT MAY
CAUSE SKIN IRRITATION, DERMATITIS OR EYE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: WASH WITH SOAP AND WATER. EYE: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES AND SEEK MEDICAL ATTENTION. WASH CLOTHES BEFORE
REUSE. INHALATION: REMOVE FROM EXPOSURE. SUPPORT BREATHING (GIVE
ARTIFICIA L RESPIRATION/OXYGEN) . INGESTION: CALL MD IMMEDIATELY .

Flash Point Method:CC
Flash Point:306F,152C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AVOID HEAT, OPEN FLAME AND ELECTRICAL
SPARKS.

Spill Release Procedures:ABSORB WITH INERT MATERIAL. PUT IN DISPOSAL
CONTAINER. FLUSH AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:ENSURE THAT ALL CONTAINERS ARE
PROPERLY LABELED TO PREVENT ACCIDENTAL INGESTION.
Other Precautions:MAY CAUSE SKIN SENSITIZATION. AVOID SKIN AND EYE
CONTACT AND BREATHING OF VAPORS. LAUNDER CONTAMINATED CLOTHING
BEFORE REUSE.

Respiratory Protection:IN CONFINED AREAS, USE NIOSH/MSHA APPROVED
RESPIRATOR.
Ventilation:LOCAL EXHAUST PREFERABLE. MECHANICAL IS ACCEPTABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APRV CHEMICAL WORKERS GOGGLES (FP N
Other Protective Equipment:ADEQUATE SKIN PROTECTION.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:392F,200C
Vapor Density:1.0
Spec Gravity:1.03 (H*2O=1)
Evaporation Rate & Reference:<1
Solubility in Water:MISCIBLE
Appearance and Odor:CLEAR AMBER, AMINE ODOR SLIGHT
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND EPOXY RESINS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:STRONG ACIDS AND EPOXY RESINS IN
UNCONTROLLED AMOUNTS.

Waste Disposal Methods:INCINERATE OR BURY IN LANDFILL IN ACCORDANCE
WITH APPROVED FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.