Product ID:KRYLON RUST MAGIC METAL PRIMER, 6410
MSDS Date:06/30/1986
FSC:8010
NIIN:00N047219
MSDS Number: BSKMQ

BORDEN

180 EAST BROAD ST
COLUMBUS, OH 43215
US

Emergency Phone: 614-431-6600

Info Phone: 614-848-9400; 614-431-6680

Cage: 9P972

BORDEN,INC. PACKAGING AND INDUSTRIAL PRODUCTS DIVISION

COLUMBUS, OH 43215 US

Telephone: 614-431-6600/800-848-9400

Cage: 9P972

LIGROINE; (VM&P NAPHTHA)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 2%

OSHA PEL 300 PPM;400 PPM STEL

ACGIH TLV: 300 PPM

KEROSENE (PETROLEUM), HYDROTREATED; (HYDROTREATED LIGHT

CAS: 64742-47-8

RTECS: OA5504000

Fraction By Weight: 28%

OSHA PEL N/K

ACGIH TLV: N/K

TECHNIQUES MAY NOT NECESSARILY ADDRESS ALL ISSUES

RTECS: 9999999ZZ

THAT YOU CONSULT W/EXPERTS OF YOUR CHOICE TO

RTECS: 9999999ZZ

FROM EYES, SKIN & CLOTHING. WASH THOROUGHLY

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:NOT EXPECTED TO BE
HARMFUL UNDER NORMAL CNDTNS OF USE. INHAL:MAY BE HARMFUL IF
INHALED. LIQ/VAP CAN CAUSE IRRIT OF NOSE, THROAT & LUNGS. SKIN:MAY
CAUSE IRRIT ON PRLNG/RPTD CONT. EYES:MAY CAUSE IRRIT ON PRLNG/RPTD
CONT. ING 1:CAN CAUSE CNS DEPRESS. SIGNS & SYMPS MAY INCL HDCH,
DIZZ, NAUS, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:VOMIT, UNCON & EVEN ASPHY. ING
2:OVEREXP MAY CAUSE KIDNEY DMG BASED ON TEST W/LAB ANIMALS. CAN
CAUSE CNS DEPRESS. SIGNS & SYMPS MAY INCL HDCH, DIZZ, NAUS, VOMIT,
UNCON & EVEN ASPHY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:DO NOT INDUCE VOMITING. CALL MD IMMEDIATELY.
INHAL:REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
RESPIRATION, PREFERABLY MOUTH-TO-MOUTH. IF BREATHING IS DIFFICULT,
GIVE OXYGEN. CALL MD . SKIN:FLUSH W/WATER. EYE:FLUSH THOROUGHLY
W/WATER FOR AT LEAST 15 MINUTES. IF IRRITATION PERSISTS, CALL MD.

Flash Point:102F,39C
Lower Limits:0.7%
Extinguishing Media:IN CASE OF FIRE, USE DRY CHEMICAL, FOAM OR CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER MAY BE INEFFECTIVE, BUT SHOULD BE USED TO KEEP
FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:COMBUSTIBLE. KEEP AWAY FROM HEAT & FLAME.

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SOAK UP
W/ABSORBENT MATERIAL & REMOVE TO A CHEMICAL DISPOSAL AREA. PREVENT
ENTRY INTO NATURAL BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID BREATHING VAPOR. USE W/ADEQUATE
VENTILATION. AVOID PROLONGED OR REPEATED CONTACT W/SKIN & EYES. DO
NOT STORE AT TEMPERATURES >120F.
Other Precautions:COMBUSTIBLE. EMPTY CONTAINER MAY CONTAIN EXPLOSIVE
VAPORS. DO NOT CUT, PUNCTURE OR WELD ON OR NEARBY.

Respiratory Protection:WHERE AIR CONTAMS CAN EXCEED ACCEPT CRITERIA,
USE NIOSH/MSHA APPRVD RESP PROT EQUIP. RESPS SHOULD BE SELECTED
BASED ON FORM & CONC OF CONTAMS IN AIR I/A/W OSHA 29 CFR
1910.134/OTHER APPLIC STDS/GUIDEL INES.
Ventilation:IF AIRBORNE CONTAMS ARE GENERATED WHEN MATL IS
HEATED/HNDLD, SUFFICIENT VENT IN VOL & AIR FLOW PATTERNS SHOULD
(SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORK GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:HANDLE I/A/W GOOD INDUS HYGIENE & SAFETY
PRACTICES. THESE PRACTICES INCL AVOIDING UNNEC EXPOS & REMOVAL OF
MATL (ING 5)
Supplemental Safety and Health
VENT:BE PROVIDED TO KEEP AIR CONTAM CONC LEVELS BELOW ACCEPT CRITERIA.
THE FOLLOWING EXPOS CONTROL TECHNIQUES MAY BE USED TO EFTIVELY MIN
EMPLOYEE EXPOS:LOC EXHST VENT, ENCLSD SYS DESIGN, PROCESS ISOL
ATION & REMOTE CONTROL IN COMBINATION W/APPROP USE OF PERSONAL PROT
EQUIP & PRUDENT WORK PRACTICES. THESE (ING 3)

Boiling Pt:B.P. Text:>280F,>138C
Vapor Density:HVR/AIR
Spec Gravity:LIGHTER/WATER
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:SLIGHT
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:50

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:KEEP AWAY FROM HEAT & FLAME.
Hazardous Decomposition Products:CO, CO*2.

Waste Disposal Methods:RECOVER FREE LIQUID, ABSORB RESIDUE & DISPOSE OF
ACCORDING TO LOCAL, STATE & FEDERAL REQUIREMENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.