BSMFK - OMEGALAQ RED LABEL THINNER

  • MSDS: BSMFK
  • Manufacturer: OMEGA ENGINEERING INC
  • Product Name: OMEGALAQ RED LABEL THINNER
  • National Stock Number: 8010-00F030927
Product Identification

Product ID:OMEGALAQ RED LABEL THINNER
MSDS Date:04/15/1993
FSC:8010
NIIN:00F030927
MSDS Number: BSMFK

Responsible Party
OMEGA ENGINEERING INC
ONE OMEGA DRIVE
STAMFORD, CT 06907-0047
US

Emergency Phone: 203-359-1660

Info Phone: 203-359-1660

Cage: 29907

Contractor
OMEGA ENGINEERING INC.
4047 STAMFORD, CT 06907-0047 US

Telephone: 203-359-1660

Cage: 29907

Ingredients

TRICHLOROETHYLENE, TCE, TRICHLOROETHENE (IARC HUMAN

CAS: 79-01-6

RTECS: KX4550000

Fraction By Weight: 99.4%

OSHA PEL 50 PPM

ACGIH TLV: 269 MG/CUM

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


1,2-BUTYLENE OXIDE

CAS: 106-88-7

RTECS: 9999999VO

Fraction By Weight: 100%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
NERVOUS SYSTEM DEPRESSION. CHRONIC: REPORTS HAVE ASSOCIATED
REPEATED & PROLONGED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS W/BRAIN
& CENTRAL NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, REDNESS, DRYNESS, HEADACHE,
DROWSINESS, NAUSEA, LOSS OF COORDINATION
Medical Cond Aggravated by Exposure:LIVER DISORDERS

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:NONE
Lower Limits:8
Upper Limits:44.8
Extinguishing Media:DRY CHEMICAL, FOAM, CO2, WATER SPRAY
Fire Fighting Procedures:USE SCBA BECAUSE OF TOXIC COMBUSTION &
DECOMPOSITION PRODUCTS.
Unusual Fire/Explosion Hazard:AUTOIGNITION TEMP: 788F. IF CONTAINER IS
NOT COOLED, IT MAY EXPLODE IN HEAT/FIRE. VAPORS ARE HEAVIER THAN
AIR & MAY ACCUMULATE IN LOW AREAS.

Accidental Release

Spill Release Procedures:VENTILATE AREA. PICK UP IN ABSORBANT MATERIAL
& DISCARD.

Handling

Handling and Storage Precautions:KEEP STORED CONTAINERS TIGHTLY CLOSED.
Other Precautions:USE ONLY IN WELL VENTILATED AREAS. AVOID CONTACT
W/SKIN, EYES, CLOTHING.

Exposure Controls

Respiratory Protection:SUPPLIED AIR RESPIRATOR IF CONCENTRATION EXCEEDS
EXPOSURE LIMITS.
Ventilation:MECHANICAL (GENERAL) IF LOCAL EXHAUST IS INADEQUATE
Protective Gloves:IMPERMEABLE
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING AS NECESSARY
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:189F
Vapor Pres:60
Vapor Density:4.53
Spec Gravity:1.46
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID W/IRRITATING ODOR
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS/BASES, OXIDIZING AGENTS, AMINES, STRONG ALKALIES, REACTIVE
METALS
Stability Condition to Avoid:HIGH TEMPERATURE SOURCES
Hazardous Decomposition Products:CO, CO2, PHOSGENE, HYDROGEN CHLORIDE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS. UN 1710

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.