BSNRB - FLAT BLACK LACQUER, TM 48B; SLATE FLAT BLACK LACQUER (83353)
- MSDS: BSNRB
- Manufacturer: CURTIS INDUSTRIES
- Product Name: FLAT BLACK LACQUER, TM 48B; SLATE FLAT BLACK LACQUER (83353)
- National Stock Number: 8010-00F031563
Product Identification
Product ID:FLAT BLACK LACQUER, TM 48B; SLATE FLAT BLACK LACQUER (83353)
MSDS Date:05/08/1986
FSC:8010
NIIN:00F031563
MSDS Number: BSNRB
Responsible Party
EASTLAKE, OH 44094
US
Emergency Phone: 216-951-2400 EXT 5678
Info Phone: 216-951-2400 EXT 282
Cage: 91636
Contractor
Telephone: 216951-2400 EXT. 282
Cage: 91636
Ingredients
PIGMENT
Fraction By Weight: <32%
TOLUENE
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 11%
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
2-BUTOXYETHANOL (ETHYLENEGLYCOL MONOBUTYL ETHER), BUTYL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 8%
OSHA PEL 50 PPM (SKIN)
ACGIH TLV: 25 PPM (SKIN)
ACETONE; DIMETHYL KETONE; 2-PROPANONE
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 34%
OSHA PEL 2400 MG/CUM
ACGIH TLV: 750 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 15%
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
RESIN
Fraction By Weight: <32%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: DEFATTING. EFFECTS ARE
REVERSIBLE. LONG TERM EXPOSURE (YEARS) VAPOR MAY CAUSE LUNG, LIVER
OR KIDNEY DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS OR NARCOSIS, DIFFICULTY
IN BREATHING. SKIN: DEFATTING, REDNESS. INGESTION: VOMITING.
Medical Cond Aggravated by Exposure:HEART DISEASE
First Aid
First Aid:INHALATION: GIVE OXYGEN. INGESTION: DON'T INDUCE VOMITING.
GASTRIC LAVAGE. EYES/SKIN: WASH W/WATER. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:-40F
Lower Limits:1.8%
Upper Limits:12%
Extinguishing Media:WATER FOG, DRY CHEMICAL OR CO2
Unusual Fire/Explosion Hazard:AEROSOL CANS MAY RUPTURE/BURST WHEN
HEATED.
Accidental Release
Spill Release Procedures:USE ABSORBENT SWEEPING COMPOUND TO SOAK UP
MATERIAL. PUT INTO CONTAINER. DISPOSE AS HAZARDOUS WASTE.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, OR OPEN
FLAME. STORE AT TEMPERATURES BELOW 120F.
Other Precautions:DON'T SMOKE WHILE SPRAYING.
Exposure Controls
Respiratory Protection:USE SELF CONTAINED BREATHING APPARATUS IF ABOVE
TLV LIMITS.
Ventilation:LOCAL EXHAUST
Eye Protection:RECOMMENDED
Other Protective Equipment:LONG SLEEVE & LONG PANTS
Work Hygienic Practices:WASH HANDS AFTER USE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:-40 TO 350F
Vapor Pres:42 PSIG
Vapor Density:4
Spec Gravity:0.9
Evaporation Rate & Reference:(BU AC = 1): 3.6
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK LIQUID SOLVENT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH TEMPERATURE, HEAT, SPARKS OR OPEN
FLAME
Hazardous Decomposition Products:CO2 & WATER
Disposal
Waste Disposal Methods:DISPOSE AS HAZARDOUS WASTE IN ACCORDANCE W/EPA
RCRA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.