BSNVM - TRIBOLUBE-19

Product Identification

Product ID:TRIBOLUBE-19
MSDS Date:05/13/1988
FSC:9150
NIIN:00F031632
MSDS Number: BSNVM

Responsible Party
AEROSPACE LUBRICANTS INC
1505 DELASHMUT AVE
COLUMBUS, OH 43212
US

Emergency Phone: 614-291-3045

Info Phone: 614-291-3045

Cage: 66164

Contractor
AEROSPACE LUBRICANTS INC.
COLUMBUS, OH 43228 US

Telephone: 614-878-3600

Cage: 66164

Ingredients

NON-HAZARDOUS FOR INGREDIENTS

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MILD IRRITANT TO THE SKIN UPON
PROLONGED EXPOSURE FOR SOME INDIVIDUALS. DECOMPOSITION PRODUCTS
FORMED AT HIGH TEMPERATURES MAY CAUSE POLYMER FEVER.
Explanation of Carcinogenicity:NONE

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER. SKIN:
WASH W/SOAP & WATER. INGESTION: GIVE LARGE AMOUNTS OF WATER. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:NONE
Fire Fighting Procedures:KEEP CONTAINERS COOL BY SPRAYING W/WATER WHEN
EXPOSED TO FIRE; IF FLAMES HAVE REACHED PRODUCT CAUSING POSSIBLE
DECOMPOSITION YIELDING TOXICS, USE SCBA.
Unusual Fire/Explosion Hazard:THIS PRODUCT DOESN'T BURN, BUT WILL
THERMALLY DECOMPOSE >290C.

Accidental Release

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT & CONTAIN
FOR DISPOSAL.

Handling

Handling and Storage Precautions:DON'T STORE NEAR FLAMMABLES OR
EXPLOSIVE MATERIALS. PROVIDE ADEQUATE VENTILATION IF USED IN TEMP
>290C.
Other Precautions:DON'T CONTAMINATE SMOKING MATERIALS.

Exposure Controls

Respiratory Protection:AS REQUIRED
Ventilation:MECHANICAL (GENERAL): RECOMMENDED.
Protective Gloves:PLASTIC DISPOSABLE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:APRON, LAB COAT, OR COVERALLS
Work Hygienic Practices:WASH HANDS AFTER EXPOSURE.
Supplemental Safety and Health

Chemical Properties

Decomp Temp:Decomp Text:>290C
Vapor Pres:0.0010
Spec Gravity:1.880
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS, WHITE GREASE.

Stability

Stability Indicator/Materials to Avoid:YES
MOLTEN ALKALI METALS/INTERHALOGEN COMPOUNDS/STRONG OR NONAQUEOUS ALKALI
& LEWIS ACIDS >100C/FLAMMABLES/EXPLOSIVES
Stability Condition to Avoid:FIRE, FLAMES, TEMPS >290C
Hazardous Decomposition Products:TOXIC VAPORS & FLUORINE COMPOUNDS
Conditions to Avoid Polymerization:TEMPS >290C

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.