BSPBW - TRAY MATERIAL & BASE PLATE MATERIAL

  • MSDS: BSPBW
  • Manufacturer: BUFFALO DENTAL MFG CO INC
  • Product Name: TRAY MATERIAL & BASE PLATE MATERIAL
  • National Stock Number: 6520-00F031761
Product Identification

Product ID:TRAY MATERIAL & BASE PLATE MATERIAL
MSDS Date:08/12/1988
FSC:6520
NIIN:00F031761
MSDS Number: BSPBW

Responsible Party
BUFFALO DENTAL MFG CO INC
575 UNDERHILL BLVD
SYOSSET, NY 11791-3416
US

Emergency Phone: 516-496-7200

Info Phone: 516-496-7200

Cage: 09464

Contractor
BUFFALO DENTAL MFG CO INC
SYOSSET, NY 11791-3416 US

Telephone: 516-496-7200

Cage: 09464

Ingredients

1,3-BUTADIENE POLYMER, STYRENE-BUTADIENE POLYMER, SBS, SBS

CAS: 9003-55-8

RTECS: WL6478000

Fraction By Weight: <0.1%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INGESTION: CHOKING SENSATION, NAUSEA.

First Aid

First Aid:EYES: WASH W/PLENTY OF WATER. SKIN: NORMAL HYGIENIC
PRACTICES. INGESTION: CONSULT PHYSICIAN. OBTAIN MEDICAL ATTENTION
IN ALL CASES.

Fire Fighting

Extinguishing Media:CO2, DRY CHEMICAL, WATER
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS

Accidental Release

Spill Release Procedures:WIPE UP W/PAPER TOWELS & DISPOSE OF IN
SUITABLE CONTAINER.

Handling

Handling and Storage Precautions:OVERHEATING MAY RESULT IN FIRE OR
FUMES. STORE AT NORMAL ROOM TEMPERATURE & HUMIDITY.
Other Precautions:HEAT ON VACUUM FORMER TO SAG 1/2 INCHES.

Exposure Controls

Ventilation:MECHANICAL (GENERAL)
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GLASSES
Other Protective Equipment:LAB COAT
Work Hygienic Practices:USE GOOD PERSONAL HYGIENE. WASH HANDS
THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
PRODUCT SOFTENS AT 190-217F.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:SEE SUPP
Spec Gravity:1.04-1.05
Solubility in Water:INSOLUBLE
Appearance and Odor:RIGID PLASTIC, BLUE OR PINK

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:CO, CO2, ORGANICS OF UNKNOWN CHEMICAL
COMPOSITION
Conditions to Avoid Polymerization:EXCESSIVE HEAT

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.