Product ID:RELIACOR II ROSIN CORE SOLDER
MSDS Date:07/19/1990
FSC:3439
NIIN:00-602-5878
MSDS Number: BTHHL

ALPHA METALS

600 ROUTE 440
JERSEY CITY, NJ 07304
US

Emergency Phone: 201-434-6778/800-424-9300(CHEMTREC)

Info Phone: 201-434-6778

Cage: 96613

FRYS METALS INC (FORMER ALPHA METALS)

JERSEY CITY, NJ 07304 US

Telephone: 201-434-6778

Cage: 96613

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: SEE #7%

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: SEE #7%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9394

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: SEE #7%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

BISMUTH

CAS: 7440-69-9

RTECS: EB2600000

Fraction By Weight: SEE #7%

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: SEE #7%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG (SB)/M3; 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

INDIUM

CAS: 7440-74-6

RTECS: NL1050000

Fraction By Weight: SEE #7%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.1 MG/M3; 9394

SOLDER ALLOY (PRODUCT CONTAINS 1 OR MORE OF INGREDS #1-6

Fraction By Weight: 96-99%

ROSIN ACID

CAS: 8050-09-7

Fraction By Weight: 1-4%

LD50 LC50 Mixture:NOT KNOWN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:ROSIN FUME CNS DEPRESSION,
ALLERGIC REACTION, THROAT & RESP TRACT IRRIT. INGEST:ESSENTIALLY
NONHAZARDOUS @ RT (NOT LIKELY TO OCCUR). SKIN:MOLTEN CORE SOLDER
WILL CAUSE BURNS. ROSIN FUME IRRIT. E YE:MOLTEN ROSIN CORE FLUX
WILL CAUSE BURNS, FUME IRRIT.
Explanation of Carcinogenicity:PER MFG'S MSDS NONE, HOWEVER, PER IARC
LEAD IS A POSSIBLE CARCINOGENIC AGENT W/INADEQUATE EVIDENCE.
Effects of Overexposure:INHAL:DIZZINESS, HEADACHE, SORE THROAT,
COUGHING. SKIN:BURNS, SKIN RASH. EYE:BURNS, REDNESS, TEARING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT
ADMINISTER OXYGEN. SEE DOCTOR. INGEST:CALL DOCTOR OR POISON CTRL
CTR. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
SKIN:FOR BURNS COOL W/ WATER & GET MED ATTN. FOR RASH REMOVE FROM
EXPOSURE & SEE DOCTOR. EYE:FOR BURNS FLUSH IMMED W/COOL WATER & GET
MED ATTN. FOR FUME IRRIT REMOVE FROM EXPOSURE.

Extinguishing Media:PER MFG'S MSDS NOT APPLICABLE; HOWEVER, USE
APPROPRIATE EXTINGUISHING MEDIA FOR SURROUNDING FIRE.
Fire Fighting Procedures:USE NIOSH-APPROVED SELF-CONTAIONED BREATHING
APPARATUS AND FULL PROTECTIVE CLOTHING IF INVOLVED IN A FIRE.
Unusual Fire/Explosion Hazard:WHEN HEATED TO HIGH TEMPERATURES, LEAD
EMITS HIGHLY TOXIC FUMES.

Spill Release Procedures:SOLID AT ROOM TEMPERATURE. IF IN MOLTEN STATE
ALLOW TO COOL AND SOLIDIFY AND THEN SCRAPE UP FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL REQUIREMENT FOR STORAGE.
READ ALL CONTAINER LABELING. FOOD/DRINK/TOBACCO PRODUCTS SHOULD NOT
BE CONSUMED/USED IN AREA WHERE CORE SOLDERS IS
Other Precautions:SINCE EMPTY CONTAINERS MAY RETAIN PRODUCT RESIDUES
ALL LABELED HAZ PRECAUTIONS MUST BE OBSERVED. FOR NDUSTRIAL USE
ONLY. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY.

Respiratory Protection:NIOSH-APPROVED RESPIRATOR FOR ORGANIC VAPORS IF
TLVS ARE EXCEEDED.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL &/OR LOCAL EXHAUST)
VENTILATION TO MAINTAIN EXPOSURE LEVELS BELOW TLVS.
Protective Gloves:NOT USUALLY NECESSARY.
Eye Protection:FACE SHIELD OR EYE GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING AND PROIR
TO EAT/SMOKE/DRINK.
Supplemental Safety and Health
CONTAINS LEAD---KNOWN TO STATE OF CA TO CAUSE BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM. PER TIR:TIN 95.24%;AG 4.4%;CU 0.2%;PB 0.1%;AR
0.05%;CD 0.005%;ZN 0.005%.

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL WIRE IN VARIOUS SHAPES & SIZES
WITH NO ODOR.

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS, STRONG ACIDS.
Stability Condition to Avoid:HIGH TEMPERATURE.
Hazardous Decomposition Products:CARBON MONOXIDE, ABIETIC ACID,
ALIPHATIC ALDEHYDES, DITERPENE ACIDS.

Waste Disposal Methods:ALLOY PORTION IS RECLAIMABLE. WASTE DISPOSAL IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS AND LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.