BTQYK - TRIBOLUBE-2
- MSDS: BTQYK
- Manufacturer: AEROSPACE LUBRICANTS INC
- Product Name: TRIBOLUBE-2
- National Stock Number: 9150-00-267-7188
Product Identification
Product ID:TRIBOLUBE-2
MSDS Date:10/20/1998
FSC:9150
NIIN:00-267-7188
MSDS Number: BTQYK
Responsible Party
COLUMBUS, OH 43212-2641
US
Emergency Phone: 614-291-3045
Info Phone: 614-291-3045
Cage: 66164
Contractor
Telephone: 502-737-6757
Cage: 66172
Ingredients
NO HAZARDOUS COMPONENTS WERE KNOWINGLY INCORPORATED INTO
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE. CHRONIC: NONE.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:PROLONGED AND REPEATED CONTACT WITH SKIN MAY
CAUSE SKIN IRRITATION. DECOMPOSITION PRODUCTS AT HIGH TEMPERATURES
ABOVE 250C MAY CAUSE "POLYMER FEVER."
Medical Cond Aggravated by Exposure:NO KNOWN MEDICAL CONDITIONS THAT
MIGHT BE AGGRAVATED BY EXPOSURE.
First Aid
First Aid:INHALATION:REMOVE TO FRESH AIR IF NECESSARY SEEK MEDICAL
ATTENTION. EYES-FLUSH WITH WATER, GET MEDICAL ATTENTION.
SKIN-WIPE OFF AND WASH WITH SOAP AND WATER. INGESTION: NO KNOWN
ADVERSE EFFECTS ARE KNOWN, CONSULT PHYSICIAN.
Fire Fighting
Autoignition Temp:>315.6C, 600.F
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER SPRAY.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES INVOLVING
CHEMICALS. DECOMPOSITION AT TEMPERATURES ABOVE 290C MAY CAUSE THE
EXPLSION OF TOXIC GASOEUS FLUORI NE COMPOUNDS
Unusual Fire/Explosion Hazard:TOXIC FLUORINE GASES ARE BY-PRODUCT OF
COMBUSTION..
Accidental Release
Spill Release Procedures:SCOOP UP WITH PROPER TOOLS, WIPE UP WITH
ABSORBENT CLOTH OR PAPER TOWEL, APPLY NON-SKID MATERIAL TO FLOOR.
COLLECT WASTE MATERIAL FOR SALVAGE OR DISPOSAL
Handling
Handling and Storage Precautions:USE REASONABLE CARE. DO NOT STORE
ABOVE 250F OR NEAR FLAMMABLES.
Other Precautions:DECOMPOSITION PRODUCTS FORMED AT HIGH TEMPERATURES
ABOVE 250C MAY CAUSE POLYMER FEVER.
Exposure Controls
Respiratory Protection:NOT REQUIRED UNLESS PRODUCT IS BEING USED AS A
MIST.
Ventilation:MECHANICAL (GENERAL): RECOMMENDED.
Protective Gloves:PLASTIC DISPOSABLE.
Eye Protection:SAFETY GLASSES RECOMMENDED.
Other Protective Equipment:PLASTIC APRON, FABRIC LABORATORY COAT
RECOMMENDED.
Work Hygienic Practices:DO NOT CONTAMINATE SMOKING MATERIALS; WASH
HANDS/OR CONTAMINATED AREA AFTER EXPOSURE.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:V6
Boiling Pt:>260.C, 500.F
Melt/Freeze Pt:>287.8C, 550.F
Vapor Pres:<5 MMHG
Spec Gravity:1.86
Solubility in Water:NEGLIGIBLE
Appearance and Odor:YELLOW GREASE, SLIGHT PETROLEUM ODOR
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A REACTION.
Stability Condition to Avoid:STRONG OXIDIZERS
Hazardous Decomposition Products:FLUORINE PRODUCTS, SILICON DIOXIDE,
CARBON DIOXIDE, TRACES OF INCOMPLETELY BURNED CARBON.
Conditions to Avoid Polymerization:WILL NOT OCCUR
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.