Product ID:TECTYL 846
MSDS Date:02/13/1991
FSC:8030
NIIN:00-062-5866
MSDS Number: BVGGJ

Emergency Phone: 800-274-5263 OR 800-ASHLAND

Info Phone: 606-264-7000

Cage: GO029

Telephone: 606-357-7206 / 800-274-5263

Cage: 72527

HYDROTREATED HEAVY NAPHTHA

CAS: 64742-48-9

Fraction By Weight: 30-60%

LD50 LC50 Mixture:PEL: NOT ESTABLISHED.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN-PROLONGED OR REPEATED CONTACT CAN
CAUSE MODERATE IRRITATION, DEFATTING, DERMATITIS.
BREATHING-EXCESSIVE INHALATION OF VAPORS CAN CAUSE NASAL AND
RESPIRATORY IRRITATION, CENTRAL NERVOUS SYSTEM EFF ECTS.
SWALLOWING-ASPIRATION OF MATERIALINTO THE LUNGS CAN CAUSE CHEMICAL
PNEUMONITIS WHICH CAN BE FATAL.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:EYES-CAN CAUSE SEVERE IRRITATION, REDNESS,
TEARING, BLURRED VISION. BREATHING-DIZZINESS, WEAKNESS, FATIGUE,
NAUSEA, HEADACHE AND POSSIBLY UNCONSCIOUSNESS, AND EVEN DEATH.
SWALLOWING-NAUSEA, VOMITING, AND DIARRHEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: THOROUGHLY WASH EXPOSED AREA WITH SOAP AND WATER.
REMOVE CONTAMINATED CLOTHING. EYES: FLUSH WITH LARGE AMOUNTS OF
WATER, LIFTING UPPER AND LOWER LIDS OCCASIONALLY. GET MEDICAL
ATTENTION. SWALLOW ED: DO NOT INDUCE VOMITING, KEEP WARM AND QUIET.
GET MEDICAL ATTENTION. BREATHED: REMOVE INDIVIDUAL TO FRESH AIR. IF
BREATHING IS HARD, GIVE OXYGEN. IF BREATHING HAS STOPPED, DO CPR.
SEE DOCTOR.

Flash Point:100F,38C
Lower Limits:0.6
Extinguishing Media:REGULAR FOAM OR CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS WITH A
FULL FACEPIECE OPERATED IN THE POSITIVE PRESSURE DEMAND MODE WHEN
FIGHTING FIRES.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR & MAY TRAVEL
ALONG THE GROUND OR BE MOVED BY VENTILATION & IGNITED BY HEAT,
PILOT LIGHTS, OTHER FLAMES & IGNITION SOURCES.

Spill Release Procedures:ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR
ABSORBENT, OR OTHER ABSORBENT MATERIAL AND TRANSFER TO HOOD.
PREVENT RUN-OFF TO SEWERS, STREAMS, OTHER WATER BODIES. IF RUN-OFF
OCCURS, NOTIFY PROPER AUTHORI TIES THAT SPILL HAS OCCURED.

Handling and Storage Precautions:DO NOT TRANSFER TO UNLABELED
CONTAINER. DO NOT USE CUTTING OR WELDING TORCH ON THIS CONTAINER
(EVEN EMPTY). USE OR STORE ONLY WITH GOOD VENTILATION.
Other Precautions:FOR INDUSTRIAL USE ONLY. 24-HOUR EMERGENCY NUMBER
1-800-ASHLAND. KEEP AWAY FROM HEAT AND OPEN FLAME. USE OR STORE
ONLY WITH ADEQUATE VENTILATION. MAINTAIN AMBIENT AIR CONCENTRATIONS
BELOW PERMISSIBLE EXPOSURE LIMITS.

Respiratory Protection:IF EXPOSURE LIMITS EXCEEDED, NIOSH/MSHA APPROVED
AIR SUPPLIED RESPIRATOR IS ADVISED. OSHA REGULATIONS ALSO PERMIT
OTHER NIOSH/MSHA RESPIRATORS (NEGATIVE PRESSURE TYPE) UNDER
SPECIFIED CONDITIONS.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOAL EXHAUST)
VENTILATION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:WEAR RESISTANT GLOVES SUCH AS:Eye Protection:CHEMICAL
SPLASH GOGGLES, SAFETY GLASSES
Other Protective Equipment:TO PREVENT REPEATED OR PROLONGED SKIN
CONTACT, WEAR IMPERVIOUS CLOTHING AND BOOTS.
Work Hygienic Practices:USE GOOD HYGIENIC PRACTICES.
Supplemental Safety and Health
AVOID CONTACT WITH EYES AND PROLONGED OR REPEATED CONTACT WITH SKIN.
CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN EMPTIED. SINCE
EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES, ALL HAZARD PRECAUTIONS
GIVEN MUST BE OBSERVED. BEFORE USE, REVIEW MATERIAL SAFETY DATA
SHEET FOR MORE DETAILED INFORMATION.

HCC:F4
Boiling Pt:B.P. Text:302F,150C
Vapor Pres:10 MMHG
Vapor Density:> THAN AIR
Spec Gravity:0.866-0.876
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:LIQUID. HETER SOLN.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY FORM TOXIC MATERIALS: CARBON
DIOXIDE AND CARBON MONOXIDE, VARIOUS HYDROCARBONS, SULFUR
COMPOUNDS.

Waste Disposal Methods:ALLOW VOLATILE PORTION TO EVAPORATE IN HOOD.
ALLOW SUFFICIENT TIME FOR VAPORS TO COMPLETELY CLEAR HOOD DUCT
WORK. DISPOSE OF REMAINING MATERIAL IN ACCORDANCE WITH APPLICABLE
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.