BVMTQ - L-12070 DEVELOPMENTAL PRODUCT

  • MSDS: BVMTQ
  • Manufacturer: 3M GENERAL OFFICES
  • Product Name: L-12070 DEVELOPMENTAL PRODUCT
  • National Stock Number: 9320-00N052721
Product Identification

Product ID:L-12070 DEVELOPMENTAL PRODUCT
MSDS Date:02/01/1990
FSC:9320
NIIN:00N052721
MSDS Number: BVMTQ

Responsible Party
3M GENERAL OFFICES
3M CENTER
ST PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 1BY21

Contractor
MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS
SAINT PAUL, MN 55144-1000 US

Telephone: 612-737-4114

Cage: 1BY21

Ingredients

VINYLIDENE FLUORIDE-HEXAFLUORO PROPENE POLYMER;

CAS: 9011-17-0

Fraction By Weight: 70-71%

OSHA PEL N/K

ACGIH TLV: N/K


CALCIUM HYDROXIDE (MFR CAS #1493-13-6)

CAS: 1305-62-0

RTECS: EW2800000

Fraction By Weight: 4-5%

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)


MAGNESIUM OXIDE

CAS: 1309-48-4

RTECS: OM3850000

Fraction By Weight: 2-3%

OSHA PEL 10 MG/M3 PARTICULATE

ACGIH TLV: 10 MG/M3 FUME


ADDITIVES

Fraction By Weight: <30%

OSHA PEL N/K

ACGIH TLV: N/K


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 21-22%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN CONTACT/INHAL:NO DATA
AVAILABLE. INGEST:NOT APPLICABLE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST:CALL MD IMMEDIATELY . EYE:IMMEDIATELY FLUSH W/PLENTY
OF WATER FOR AT LEAST 15 MINUTES. CALL MD. SKIN:WASH AFFECTED AREA
W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR.

Fire Fighting

Flash Point:NONE
Extinguishing Media:WATER, FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:TOXIC BY-PRODUCTS, INCLUDING HF, MAY BE
FORMED.

Accidental Release

Spill Release Procedures:OBSERVE PRECAUTIONS FROM OTHER SECTIONS OF
THIS MSDS. COLLECT SPILLED MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:FOR USE BY QUALIFIED PERS ONLY. CHEM,
PHYSICAL & TOXICOLOGICAL PROPERTIES OF THIS PROD HAVE NOT BEEN
FULLY INVESTIGATED & ITS HNDLG/USE MAY BE HAZ.
Other Precautions:GENERAL SAFE PRACTICE REQUIRESS THAT CONT W/SKIN &
EYES & BRTHG OF VAPS, FUMES, MISTS/DUSTS SHOULD BE AVOIDED. WHEN
NOT IN USE, CNTNR SHOULD BE KEPT TIGHTLY CLSD & AWAY FROM
HEAT/FLAME. AVOID PRLNG/RP TD BRTHG OF CONC VAPS. USE ONLY (SUPDAT)

Exposure Controls

Respiratory Protection:IF DECOMPOSITION OCCURS, USE NIOSH/MSHA APPROVED
ORGANIC VAPOR & ACID GAS CARTRIDGE MASK.
Ventilation:GENERAL VENTILATION ADEQUATE <350F. LOCAL EXHAUST
RECOMMENDED >350F.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:NORMAL INDUSTRIAL ATTIRE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
WASTE DISP METH:COMBUST PRODS WILL INCL HF. SINCE REGS VARY, CONSULT
APPLIC REGS/AUTHS BEFORE DISP. OTHER PREC:IN AREAS SUFFICIENTLY
VENTILATED TO PVNT VAP BUILDUP. AVOID INHAL OF DECOMP PRODS. PREVEN
T MOISTURE CONTAMINATION. DO NOT SMOKE WHILE HANDLING.

Chemical Properties

Spec Gravity:1.8 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK, RUBBERY SOLID.

Stability

Stability Indicator/Materials to Avoid:YES
AL OR MG POWDER & HIGH SHEAR OR TEMPERATURE CONDITIONS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
TOXIC MATERIALS INCLUDING HF.

Disposal

Waste Disposal Methods:DISP MUST BE I/A/W FED, STATE & LOC REGS . FOR
QTYS <100 LBS:DISP OF WASTE PROD IN SANIT LANDFILL. DISP OF BULK
PROD IN FACILITY PERMITTED TO ACCEPT CHEM WASTES. DISP
ALTERNATIVE:MIX W/FLAMM MAT L & INCIN IN INDUS/COMMERICAL INCIN.
(SUPP DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.