Product ID:M-BOND AE 10 RESIN
MSDS Date:01/04/1990
FSC:8040
NIIN:00F000059
MSDS Number: BWHFB

MEASUREMENTS GROUP INC

US HWY 64
WENDELL, NC 27591
US

Emergency Phone: 919-365-3800

Info Phone: 919-365-3800

Cage: 88952

MEASUREMENTS GROUP INC

WENDELL, NC 27591 US

Telephone: 919-365-3800

Cage: 88952

RESORCINOL, M-DIHYDROXYBENZENE

CAS: 108-46-3

RTECS: UG9625000

Fraction By Weight: 3%

OSHA PEL 10 PPM

ACGIH TLV: 45 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PHENYL GLYCIDYL ETHER-PGE (SUSPECTED HUMAN CARCINOGEN)

CAS: 122-60-1

RTECS: TZ3675000

Fraction By Weight: 4%

OSHA PEL 60 MG/CUM

ACGIH TLV: 6.1 MG/CUM

EPICHLOROHYDRIN/BISPHENOL A TYPE EPOXY RESIN

Fraction By Weight: 93%

EPICHLOROHYDRIN, CHLOROMETHYLOXIRANE (SUSPECTED HUMAN

CAS: 106-89-8

RTECS: TX4900000

Fraction By Weight: <100%PPM

OSHA PEL 5 PPM (SKIN) TWA

ACGIH TLV: 0.38 MG/CUM IC (A2)

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION W/POSSIBILITY OF
PERMANENT DAMAGE IS LEFT UNTREATED. SKIN: IRRITATION, HYPEREMIA,
ITCHING & DERMATITIS. INGESTION: BURNS OF MOUTH & THROAT.
INHALATION: RESPIRATORY CONGESTION.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:EYES: IRRITATION, BURNING SENSATION, & REDNESS.
SKIN: ALLERGIC REACTION.
Medical Cond Aggravated by Exposure:ALLERGIC SKIN REACTION &
DERMATITIS.

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER & FLUSH W/CLEAN WATER. INGESTION: GIVE PLENTY
OF WATER OR MILK. DON'T INDUCE VOMITING. NOTE TO PHYSICIAN:
CORROSIVE & MAY CAUSE STRICTURE. IF LAVAGE IS PERFORMED, SUGGEST
ENDOTRACHEAL &/OR ESOPHAGOSCOPIC CONTROL. TREAT BURNS AS ANY
THERMAL BURN, AFTER DECONTAMINATION. NO SPECIFIC ANTIDOTE. OBTAIN
MED ATTN. SEE SUPP.

Flash Point Method:PMCC
Flash Point:245F/118C
Lower Limits:1.4%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM

Spill Release Procedures:SOAK UP W/ABSORBENT MATERIAL. RESIDUAL RESIN
MAY BE REMOVED USING STEAM OR HOT SOAPY WATER.

Handling and Storage Precautions:STORE BELOW 80F (27C) IN A DRY PLACE.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:AVOID BREATHING OF VAPORS & CONTACT W/SKIN & EYES.

Ventilation:LOCAL EXHAUST/MECHANICAL: TO KEEP BELOW TLV
Protective Gloves:NEOPRENE/POLYETHYLENE
Eye Protection:CHEMICAL SAFETY GLASSES
Other Protective Equipment:NEOPRENE/POLYETHYLENE APRON, SAFETY SHOWER,
EYE WASH STATION
Work Hygienic Practices:WASH THOROUGHLY W/SOAP & WATER AFTER HANDLING.
Supplemental Safety and Health
FIRST AID CON'T: SUPPORTIVE CARE & TREATMENT BASED ON JUDGEMENT OF
PHYSICIAN IN RESPONSE TO REACTIONS OF PATIENT.

Vapor Pres:1
Vapor Density:>3.8
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER TO CLEAR LIQUID

Stability Indicator/Materials to Avoid:YES
STRONG ALKALINE, ACID, AMINE & OXIDIZERS
Stability Condition to Avoid:LARGE MASS SREACTIONS IN EXCESS OF 1 LB
(0.45 KG) W/ALIPHATIC AMINE SYSTEMS.
Hazardous Decomposition Products:BY PRODUCTS EXPECTED W/INCOMPLETE
COMBUSTION OF EPOXY RESINS, PHENOLS, OXIDES OF SILICON & CARBON.

Waste Disposal Methods:INCINERATE ACCORDING TO LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.