Product ID:WALL-NU TROWELABLE PTB, A0764C000B
MSDS Date:05/08/1989
FSC:8010
NIIN:00N058530
Kit Part:Y
MSDS Number: BXDDZ

STEELCOTE MFG CO

3418 GRATIOT
ST LOUIS, MO 63103
US

Emergency Phone: 314-771-8053

Info Phone: 314-771-8053

Preparer: BARBARA STELLER

Cage: DO668

STEELCOTE MFG CO

ST. LOUIS,, MO 63103 US

Telephone: (314) 771-8053

Cage: DO668

BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (BISPHENOL

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 40%

OSHA PEL N/K

ACGIH TLV: N/K

WOLLASTONITE; (CALCIUM SILICATE FIBER)

CAS: 13983-17-0

RTECS: ZC7950000

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K

OXIRANE, (CHLOROMETHYL-, POLYMER W/ALPHA-

CAS: 9072-62-2

RTECS: RR0430000

Fraction By Weight: 8%

OSHA PEL N/K

ACGIH TLV: N/K

GLYCOL CLYCICLYL ETHER)

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K

TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 40%

OSHA PEL 20 MPPCF

ACGIH TLV: 2 MG/M3 RDUST

LD50 LC50 Mixture:SEE INGREDIENT 1.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:EXCESSIVE EXPOSURE MAY
RESULT IN HDCH, DIZZ, NAUS & POSS UNCON. SKIN CONTACT:MODERATELY
IRRITATING & MAY CAUSE CHEM BURNS. SENSITIZER-MAY CAUSE ALLERGIC
RXNS-WHICH CAN BE SEVERE IN CERTAIN INDIVIDUALS. SKIN
ABSORPTION:SAME AS INHAL. EYE CONTACT:MODERATELY IRRITATING.
INGEST:MAY BE HARMFUL (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:IF SWALLOWED. CHRONIC:SIMILAR PRODUCTS
REPORTED TO BE MUTAGENIC. REPEATED OVEREXPOSURE TO DUST MAY CAUSE
LUNG FIBROSIS OR AFFECT RESPIRATORY FUNCTION.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE & LUNG
DISORDERS MAY BE AGGRAVATED. PRE-EXISTING SKIN OR LUNG ALLERGIES
MAY INCREASE CHANCE OF DEVELOPING ALLERGIC SYMPTOMS FROM THIS
PRODUCT.

First Aid:INHAL:REMOVE TO FRESH AIR. INGEST:IN CONSCIOUS DRINK TWO
GLASSES OF WATER & INDUCE VOMITING. GET MEDICAL ATTENTION.
SKIN:WASH AFFECTED SKIN W/SOAP & WATER. LAUNDER CLOTHING BEFORE
WEARING. DISCARD CON TAMINATED LEATHER PRODUCTS. GET
MEDICALATTENTION PROMPTLY. EYE:FLUSH W/LARGE QUANTITIES OF WATER
FOR AT LEAST 15 MINUTES. GET PROMPT MEDICAL ATTENTION.

Flash Point:200F,93C
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . BURNING WILL PRODUCE TOXIC FUMES. COOL FIRE EXPOSED
CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:HEATING RESIN >300F IN PRESENCE OF AIR
MAY CAUSE SLOW OXIDATIVE DECOMP >500F. POLYMERIZATION MAY OCCUR.
SOME CURING AGENTS CAN PRDCE EXOTHERMIC RXNS (SUPP DATA)

Spill Release Procedures:ELIMINATE IGNITION SOURCES & PROVIDE GOOD
VENTILATION. FOR A LARGE SPILL, WEAR APPROPRIATE NIOSH/MSHA
APPROVED RESPIRATORY PROTECTION. DIKE SPILL AREA, SOAK UP W/INERT
ABSORBENT MATERIAL & PLACE IN CL OSED CONTAINERS FOR PROPER
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MAINTAIN GOOD HOUSEKEEPING. AVOID ALL
SKIN & EYE CONTACT W/HOT LIQUID.
Other Precautions:THIS COATING MAY CONTAIN MATERIALS CLASSIFIED AS
NUISANCE PARTICULATES; FOR EXAMPLE, TITANIUM DIOXIDE, CALCIUM
CARBONATE, ETC, WHICH MAY BE PRESENT AT HAZARDOUS LEVELS ONLY
DURING SANDING OR ABRADING OF DRIED FILM.

Respiratory Protection:IF EXPOSURE EXCEEDS TLV USE APPROPRIATE
NIOSH/MSHA APPROVED RESPIRATORY PROTECTIVE EQUIPMENT W/IN USE
LIMITATIONS OF THESE DEVICES; IN ALL OTHER SITUATIONS USE
NIOSH/MSHA APPROVED SCBA.
Ventilation:EXPLOSION PROOF LOCAL VENTILATION AT POINT OF CONTAMINANT
RELEASE IS RECOMMENDED ALONG W/GOOD GENERAL MECH VENT.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE BATH AND SAFETY SHOWER WHICH MEET ANSI
DESIGN CRITERIA , BARRIER CREAM & PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING. WASH
CLOTHES AFTER EACH USE.
Supplemental Safety and Health
EXPLO HAZ:WHICH IN LARGE MASSES CAN CAUSE RUNAWAY POLYMERIZATION &
CHARRING OF REACTANTS. EYE PROT:& FULL LENGTH FACESHIELD .

Vapor Density:HVR/AIR
Spec Gravity:1.5 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:EPOXY COATING.

Stability Indicator/Materials to Avoid:YES
STRONG ACID, OXIDIZING AGENTS, LEWIS OR MINERAL ACIDS, BASES/ALIPHATIC
AMINES & MERCAPTANS.
Stability Condition to Avoid:EXCESSIVE HEAT & ANY SOURCE OF IGNITION.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
ALDEHYDES & ORGANIC COMPOUNDS.

Waste Disposal Methods:COMPLY W/FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.