Product ID:TILE-X 2000 PTB A0711C000B
MSDS Date:05/02/1989
FSC:8010
NIIN:00N058502
Kit Part:Y
MSDS Number: BXFDY

STEELCOTE MFG CO

3418 GRATIOT
ST LOUIS, MO 63103
US

Emergency Phone: 314-771-8053

Info Phone: 314-771-8053

Preparer: BARBARA STELLER

Cage: DO668

STEELCOTE MFG CO

ST. LOUIS,, MO 63103 US

Telephone: (314) 771-8053

Cage: DO668

11.0 @

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 20%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

ISOBUTYRIC ACID, ISOBUTYL ESTER; (ISOBUTYL ISOBUTYRATE).

CAS: 97-85-8

RTECS: NQ5250000

Fraction By Weight: 15%

OSHA PEL N/K

ACGIH TLV: N/K

SOLVENT NAPHTHA(PETROLEUM), LIGHT AROMATIC; (PETROLEUM

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: <5.0%

OSHA PEL N/K

ACGIH TLV: N/K

3.73 LG/GL (446 G/L)

RTECS: 9999999VO

LD50 LC50 Mixture:SEE ING 2
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: NASAL & RESP IRRIT, DIZZ, WEAK,
FATIGUE, NAUS, HDCH, POSS UNCON & EVEN DEATH. SKIN: MOD IRRIT & MAY
CAUSE DEFATTING & DERM. EYE: SEV IRRIT TO EYES & MAY CAUSE REDNESS,
TEARING/BLURRED VISION. S KIN(ABSORB): SEE INHAL. INGEST: MAY CAUSE
GI IRRIT NAUSEA, VOMIT & DIARR. PULM ASPIR HAZ-MAY LEAD TO (EFTS OF
OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:PNEUM-WHICH CAN BE FATAL.
CHRONIC:CONTAINS MATLS WHICH UPON RPTD OVEREXP MAY CAUSE:KIDNEY,
PERM BRAIN & CNS DMG, CARD ABNORMS. IN ANIMALS:ANEMIA, LIVER
ABNORMS, KIDNEY & EYE DMG. MAY CAUSE RE D BLOOD CELL & LEUCOCYTE
DISORDERS WHICH MAY RSLT IN ANEMIC CNDTN. RPTD OVEREXP TO DUST MAY
CAUSE LUNG DMG(SILICOSIS).
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL: REMOVE TO FRESH AIR. IF BRTHG STOPS APPLY ARTF RESP &
SEEK IMMED MED ATTN. INGEST: DO NOT INDUCE VOMITING. CALL MD. SKIN:
IF CLTHG IS SOAKED, IMMED REMOVE CLTHG. WASH SKIN W/SOAP & WATER.
LAUND ER CLTHG BEFORE WEARING. CALL MD IF IRRIT DEVELOPS. EYE:
FLUSH W/LGE QTYS OF WATER FOR AT LEAST 15 MINUTES. GET PROMPT
MEDICAL ATTN.

Flash Point Method:TCC
Flash Point:104F,40C
Lower Limits:1.0%
Upper Limits:7.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT. BURNING WILL PRDCE TOXIC FUMES. COOL FIRE
EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:VAPS ARE HVR/AIR & MAY TRAVEL ALONG
GROUND/BE MOVED BY VENT TO IGNIT SOURCES AT LOCATIONS DISTANT FROM
MATL HNDLG PT. WATER MAY BE INEFTIVE IN FIGHTING (SUPDAT)

Spill Release Procedures:SPILL: ELIM IGNIT SOURCES & PROVIDE GOOD VENT.
FOR LGE SPILL, WEAR NIOSH/MSHA RESP PROT. DIKE SPILL AREA, SOAK UP
W/INERT ABSORB MATL & PLACE IN CLSD CNTNRS FOR PROPER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:ALL FIVE GALLON PAILS & LRGR METAL
CNTNRS SHOULD BE GROUNDED &/BONDED WHEN MATL IS TRANSFERRED.
Other Precautions:THIS COATING MAY CONTAIN MATLS CLASSIFIED AS NUISANCE
PARTICULATES; FOR EXAMPLE, TITANIUM DIOXIDE, CALCIUM CARBONATE, ETC
WHICH MAY BE PRESENT AT HAZARDOUS LEVELS ONLY DURING SANDING OR
ABRADING OF TH E DRIED FILM.

Respiratory Protection:IF EXPOSURE EXCEEDS TLV USE APPROP NIOSH/MSHA
APPROVED RESP PROTECTIVE EQUIPMENT W/IN USE LIMITATIONS OF THESE
DEVICES; IN ALL OTHER SITUATIONS USE NIOSH/MSHA SCBA(SCUBA).
Ventilation:ADEQUATE TO KEEP VAPOR CONCENTRATION BELOW TLV LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EYE BATH, SAFETY SHOWER, BARRIER CREAM &
PROTECTIVE CLTHG.
Work Hygienic Practices:MAINTAIN GOOD HOUSEKEEPING. WASH HANDS BEFORE
EATING OR SMOKING. WASH CLOTHES AFTER EACH USE.
Supplemental Safety and Health
FIRE FIGHT PROC: FIRE. PRESSURE MAY BUILD UP IN CONTAINERS AND CREATE
AN EXPLOSION HAZARD.

Boiling Pt:B.P. Text:>302F,>150C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:1.1(H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:POLYESTER RESIN SOLUTION.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT AND ANY SOURCE OF IGNITION.
DO NOT CUT OR WELD NEAR THIS PRODUCT.
Hazardous Decomposition Products:CARBON MONOXIDE, NH*3, CARBON DIOXIDE,
VARIOUS HYDROCARBONS & OXIDES OF SILICON.

Waste Disposal Methods:COMPLY WITH FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.