BXHQP - OIL STAIN, A48V111, CLEAR BASE

  • MSDS: BXHQP
  • Manufacturer: THE SHERWIN WILLIAMS CO
  • Product Name: OIL STAIN, A48V111, CLEAR BASE
  • National Stock Number: 8010-01-397-3839
Product Identification

Product ID:OIL STAIN, A48V111, CLEAR BASE
MSDS Date:04/01/1991
FSC:8010
NIIN:01-397-3839
MSDS Number: BXHQP

Responsible Party
THE SHERWIN-WILLIAMS CO
101 PROSPECT AVE N W
CLEVELAND, OH 44115
US

Emergency Phone: 216-566-2917

Info Phone: 216-566-2902

Cage: DO693

Contractor
THE SHERWIN-WILLIAMS CO
CLEVELAND, OH 44115 US

Telephone: 216-566-2902

Cage: DO693

Ingredients

MINERAL SPIRITS (VAPORS PRESSURE 2.0 MM HG)

CAS: 64742-47-8

Fraction By Weight: 73-78%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


MINERAL SPIRITS, 140-FLASH (VAPOR PRESSURE 0.5 MM HG)

CAS: 64475-85-0

RTECS: PY8240000

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


TOLUENE (VAPOR PRESSURE 22.0 MM HG)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 3%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


VOC 5.51 LB/GL

Hazards

Reports of Carcinogenicity:NTP:UNKNOWN IARC:UNKNOWN OSHA:NO
Health Hazards Acute and Chronic:IRRIT OF EYES, SKIN & RESPIRATORY
SYSTEM. MAY CAUSE NERVOUS SYSTEM DEPRESSION. EXTREME OVEREXPOSURE
MAY RESULT IN UNCONSCIOUSNESS, POSSIBLY DEATH. HEADACHE, DIZZY,
NAUSEA, LOSS OF COORDINATION ARE IND ICATIONS OF EXCESSIVE
OVEREXPOSURE TO VAPORS OR SPRAY MISTS. REDNESS, ITCHING, BURNING
MAY INDICATE EXCESSIVE EXPOSURE.
Effects of Overexposure:PROLONGED OVEREXPOSURE TO SOLVENT INGRED. MAY
CAUSE ADVERSE EFFECTS TO THE LIVER, URINARY SYSTEMS. REPORTS HAVE
ASSOCIATED REPEATED AND PROLONGED OVER EXPOSURE TO SOLVENTS WITH
PERMANENT BRAIN AND NER VEOUS SYSTEM DAMAGE.

First Aid

First Aid:INHAL: REMOVE FROM EXPOSURE. RESTORE BREATHING, KEEP WARM &
QUIET. SKIN: WASH AFFECTED AREA THOROUGHLY WITH SOAP & WTR. REMOVE
CONTAMINATED CLOTHING & WASH BEFORE RE-USE. EYE: FLUSH W/LARGE AMTS
OF WA TER FOR 15 MIN. GET MEDICAL ATTENTION. SWALLOWED:NEVER GIVE
ANY THING BY MOUTH TO UNCONSCIOUS PERSON,DO NOT INDUCE VOMITING;
GIVE SEVERAL GLASSES OF WATER. GET MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:PMCC
Flash Point:95.0F,35.0C
Lower Limits:1.0
Upper Limits:6.7
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM
Fire Fighting Procedures:FULL PROTECTIVE EQUIP, W/SCBA, WATER MAY BE
INEFFECTIVE. IF USED, FOG NOZZLES PREFERABLE. WATER TO COOL CLOSED
CNTNR/PREVENT PRESSUE,AUTOIGNITION, OR EXPLOSION.
Unusual Fire/Explosion Hazard:KEEP CNTNR CLSD. KEEP FRM. HEAT, ELECTR
EQUIP, SPARK, FLAME. CLSD CNTNR MAY EXPLODE W/HEAT. APPLICATION
TOHOT SURFACE REQ. SPECIAL PRECAUTION. DURING EMERGENCY*

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
REMOVE WITH INERT ABSORBENT.

Handling

Handling and Storage Precautions:CONTENTS ARE COMBUSTIBLE. KEEP FROM
HEAT/FLAME. CONSULT NFPA CODE. USE APPROVED BONDING, GROUNDING
PROCEDURES. KEEP CLOSED WHEN NOT IN USE.**
Other Precautions:**TRANSFER ONLY TO APPROVED CONTAINERS WITH COMPLETE
& APPROPRIATE LABELS. DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
CHILDREN. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING
INHALING THE CONTENT S MAY BE HARMFUL OR FATAL.

Exposure Controls

Respiratory Protection:IF EXPOSURE CANNOT BE CONTROLLED VENTILATION, WEAR NIOSH/MSHA APPROVED ORGANIC VAPOR/PART ICULATE
RESPIRATOR. WHEN SANDING/ABRADING DRIED FILM, WEAR NIOSH/MSHA
APPROVED DUST/MIST RESP GENER ATED FROM PRODUCT, PAINT, OR
ABRASIVE.
Ventilation:LOCAL EXHAUST PREFERRED. GEN EXHAUST ACCEPTIBLE IF EXPOSURE
MAINTAINED Protective Gloves:USE GLOVES RECOMMENDED BY GLOVE SUPPLIER
Eye Protection:SAFETY GLASSES/UNPERFORATED SIDESHIELDS
Work Hygienic Practices:WASH HANDS AFTER USING
Supplemental Safety and Health
USE ONLY WITH ADEQUATE VENTILATION. AVOID BREATHING VAPOR AND SPRAY
MIST. AVOID CONTACT WITH EYES & SKINS.

Chemical Properties

Boiling Pt:B.P. Text:132 TO 388F
Vapor Density:>AIR
Spec Gravity:0.81-1.10
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:75-90%

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:BY FIRE: CARBON DIOXIDE, CARBON
MONOXIDE
Conditions to Avoid Polymerization:*OVEREXPOSURE TO DECOMPOSITON
PRODUCTS MAY CAUSE HEALTH HAZARD. SYMPTOMS MAY NOT BE IMMEDIATELY
APPARENT.

Disposal

Waste Disposal Methods:WASTE MAY BE HAZARDOUS AS DEFINED BY RCRA 40 CFR
261. TEST FOR IGNITABILITY/DETERMINE EPA HAZ WASTE NUMBER.
INCINERATE IN APPROVED FACILITY. DO NOT INCINERATE CLOSED
CONTAINER. DISPOSE OF IN ACCORDANC E W/FED, STATE, LOCAL REGS
REGARDING POLLUTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.