BXVWX - D GREASE-NATURAL
- MSDS: BXVWX
- Manufacturer: PRECISION SUPPLY
- Product Name: D GREASE-NATURAL
- National Stock Number: 7930-00N060680
Product Identification
Product ID:D GREASE-NATURAL
MSDS Date:11/14/1988
FSC:7930
NIIN:00N060680
MSDS Number: BXVWX
Responsible Party
BAKERSFIELD, CA 93309
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 305-974-5440
Cage: JO046
Contractor
Telephone: 305-974-5440
Cage: JO046
Ingredients
CYCLOHEXENE, 1-METHYL-4-(1-METHYLETHENYL)-, (R)-; (CITRUS
CAS: 5989-27-5
RTECS: GW6360000
OSHA PEL N/K
ACGIH TLV: N/K
ISOPROPYL ALCOHOL (SARA 313)
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM/500STEL
HYDROCARBON PROPELLANT
CAS: 68476-86-8
OSHA PEL 1000 PPM (MFR)
ACGIH TLV: 1000 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE & CHRONIC: SKIN
CONTACT/ABSORPTION: NO EVIDENCE OF ADVERSE EFFECTS FROM AVAILABLE
INFORMATION. PROLONGED OR REPEATED CONTACT MAY CAUSE IRRITATION.
INGESTION: CAN CAUSE GASTROINTESTINAL IRRITATIO N, NAUSEA, VOMITING
AND DIARRHEA. ASPIRATION OF MATERIAL INTO LUNGS CAN CAUSE CHEMICAL
PNEUMONITIS. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: EYES: CAN CAUSE SEVERE IRRITATION,
REDNESS, TEARING, AND BLURRED VISION. INHALATION: PRODUCT IS FOAM.
INHALATION OF VAPORS UNLIKELY. NO HARMFUL EFFECTS KNOWN FROM
AVAILABLE INFORMATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH WITH WATER, LIFTING UPPER AND LOWER LIDS, FOR AT
LEAST 15 MINUTES. GET MEDICAL ATTENTION. SKIN: WASH EXPOSED SKIN
AREAS WITH SOAP AND WATER. INHALATION: TREAT FOR STRANGULATION.
INGESTION: DILUTE WITH WATER. DO NOT INDUCE VOMITING. GET MEDICAL
ATTENTION.
Fire Fighting
Flash Point Method:TOC
Flash Point:130F,54C
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE. LEVEL 2 AEROSOL
(NFPA 30B).
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . KEEP CONTAINERS COOL.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES (ABOVE 120F),
CONTAINERS MAY VENT, RUPTURE OR BURST.
Accidental Release
Spill Release Procedures:CLEAN UP AREA BY MOPPING OR WITH ABSORBENT
MATERIALS AND PLACE IN CLOSED CONTAINERS FOR DISPOSAL. CONTACT
FEDERAL, STATE, AND LOCAL AUTHORITIES FOR APPROVED DISPOSAL
PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE AT TEMPERATURES ABOVE
120F.
Other Precautions:PLEASE READ AND FOLLOW THE DIRECTIONS ON THE PRODUCT
LABEL. THEY ARE YOUR BEST GUIDE TO USING THIS PRODUCT IN THE MOST
EFFECTIVE WAY, AND THEY ALSO GIVE THE NECESSARY SAFETY PRECAUTIONS
TO PROTECT YOU R HEALTH.
Exposure Controls
Respiratory Protection:UNDER NORMAL CONDITIONS, NO RESPIRATORY
PROTECTION IS REQUIRED. USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NORMAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:DO NOT EAT, DRINK OR SMOKE IN WORK AREA. WASH
HANDS BEFORE EATING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Vapor Pres:45 @ 75F
Spec Gravity:0.945 (H*2O=1)
Solubility in Water:COMPLETE
Appearance and Odor:WHITE GEL WITH CITRUS ODOR
Percent Volatiles by Volume:>40
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS OR BASES, SELECTED AMINES.
Stability Condition to Avoid:DO NOT EXPOSE TO TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
OF AIR MAY YIELD CARBON MONOXIDE AND/OR CARBON DIOXIDE.
Disposal
Waste Disposal Methods:WHEN USED PROPERLY AEROSOL PROD DO NOT GENERATE
HAZ WASTE. EMPTY CONTRS CAN NOT BE REUSED & SHOULD BE WRAPPED & PUT
IN A PERMITTED WASTE MANAGEMENT FACILITY. CONSULT FEDERAL, STATE,
AND LOCAL DISPOSAL AUTHORITIES FOR APPROVED PROCEDURES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.