BYFCW - AI-1066 CHROMIUM CARBIDE

Product Identification

Product ID:AI-1066 CHROMIUM CARBIDE
MSDS Date:08/01/1991
FSC:3439
NIIN:01-380-2021
MSDS Number: BYFCW

Responsible Party
MILLER THERMAL TECHNOLOGIES,INC.,ALLOYS INTL. DIV.
1901 ELLIS SCHOOL ROAD
BAYTOWN, TX 77521-1215
US

Emergency Phone: 713-426-5535

Info Phone: 713-426-5535

Cage: 06677

Contractor
MILLER THERMAL TECHNOLOGIES,INC.,ALLOYS INTL. DIV.
BAYTOWN, TX 77521-1215 US

Telephone: 713-426-5535

Cage: 06677

Ingredients

CHROMIUM (SARA 313) (CERCLA)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 87%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9495

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


CARBON

Fraction By Weight: 13%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:AFFECTS ASSOCIATED WITH OVEREXPOSURE
TO METAL DUSTS MAY INCLUDE RESPIRATORY IRRITATION, CONJUNCTIVITIS,
PNEUMOCONIOSIS, ETC.
Explanation of Carcinogenicity:CONTAINS CHROMIUM WHICH IARC AND NTP
LIST AS A SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALED-COUGHING, WHEEZING, SNEEZING, SHORTNESS
OF BREATH, BLACK SPUTUM, DYSPNEA. EYES-REDNESS, TEARING,
DISCOMFORT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES-IRRIGATE WITH WATER FOR 15 MINUTES. SKIN-REMOVE
CONTAMIANTED CLOTHES AND FLUSH WITH LOTS OF WATER. INGESTED-INDUCE
VOMITING IF VERY LARGE AMOUNTS INGESTED. CONSULT MEDICAL PERSONNEL.
INHALED-REMO VE TO FRESH AIR. CONSULT A PHYSICIAN.

Fire Fighting

Extinguishing Media:CLASS D FIRE: DO NOT USE WATER. USE DRY CHEMICAL,
DRY SAND OR CARBON DIOXIDE TO SMOTHER FIRE.
Fire Fighting Procedures:FIRE MAY BE ISOLATED AND ALLOWED TO BURN
ITSELF OUT. DO NOT DISTURB BURNING METAL WHILE EXTINGUISHING THE
FIRE.
Unusual Fire/Explosion Hazard:EXPLOSIONS MAY BE INITIATED BY EXPOSING
ANY CONCENTRATED DUST SUSPENSION IN AN ENCLOSED AREA TO A SPARK OR
FLAME REGARDLESS OF CHEMICAL NATURE OF THE DUST.

Accidental Release

Spill Release Procedures:NO SPECIAL STEPS NECESSARY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID AND CONTROL OPERATIONS WHICH
CREATE DUSTING.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR OR
AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS REQUIRED. USE IN ACCORDANCE
WITH 29 CFR 1910.13 4 AND MANUFACTURER'S RECOMMENDATIONS.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION OR LOCAL EXHAUST TO
MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:IMPERVIOUS-LEATHER.
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:WORK CLOTHES.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:3452F,1900C
Spec Gravity:6.68
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY POWDER-NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, STRONG OXIDIZING AGENTS, STRONG ALKALIS AND MOISTURE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.