BZMBK - M08-MOLD RELEASE PASTE WAX

  • MSDS: BZMBK
  • Manufacturer: MEGUIAR'S INC
  • Product Name: M08-MOLD RELEASE PASTE WAX
  • National Stock Number: 7930-00N064701
Product Identification

Product ID:M08-MOLD RELEASE PASTE WAX
MSDS Date:02/08/1993
FSC:7930
NIIN:00N064701
MSDS Number: BZMBK

Responsible Party
MEGUIAR'S INC
17991 MITCHELL SOUTH
IRVINE, CA 92714
US

Emergency Phone: 800-854-8073

Info Phone: 714-752-8000

Cage: EO362

Contractor
MEGUIARS INC/FORMERLY MIRROR BRIGHT POLISH
17177 IRVINE, CA 92714 US

Telephone: 714-752-8000

Cage: 14088

Ingredients

PETROLEUM DISTILLATE; (LIGHT DISTILLATE)

CAS: 64742-14-9

Fraction By Weight: 10-20%

OSHA PEL N/K

ACGIH TLV: N/K


NAPHTHA PETROLEUM, HEAVY ALKYLATE; (HEAVY ALKYLATE NAPHTHA)

CAS: 64741-65-7

Fraction By Weight: 20-30%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


TURPENTINE

CAS: 8006-64-2

RTECS: YO8400000

Fraction By Weight: 5-15%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


TURPENTINE

CAS: 9005-90-7

Fraction By Weight: 5-15%

OSHA PEL 560 MG/M3 (MFR)

ACGIH TLV: 560 MG/M3 (MFR)


NON-HAZARDOUS INGREDIENTS

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR INTENTIONAL EXPOSURE TO
HIGH CONCENTRATIONS MAY CAUSE IRRITATION TO SKIN, DIGESTIVE OR
BREATHING TRACTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SENSITIVE SKIN OR IRRITATION.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . SKIN:WASH W/SOAP & WATER. EYES:FLUSH W/CLEAR WATER FOR AT
LEAST 15 MINUTES. INGEST:DO NOT INDUCE VOMITING.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>150F,>66C
Extinguishing Media:DRY CHEMICAL, WATER, FOAM, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:CONTAIN & ABSORB. MAY BE CONTAINED IN METAL,
PLASTIC OR GLASS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP FROM EXTREME HEAT.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NONE REQUIRED FOR NORMAL USE.
Ventilation:LOCAL EXHAUST: ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:167F,75C
Vapor Pres:<2
Vapor Density:>1
Spec Gravity:0.85
Evaporation Rate & Reference:<1
Solubility in Water:NONE
Appearance and Odor:GOLD TO LIGHT PASTE W/SLIGHT ODOR OF HYDROCARBON.
Percent Volatiles by Volume:45 MAX

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS & ACIDS.
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:CO, CO*2 & SILICONE OXIDES.

Disposal

Waste Disposal Methods:SANITARY LANDFILLS FOR ABSORBENT MATERIALS, OR
AS REQUIRED BY FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.