CBHDS - SOFT SOLDERS, 45/55

  • MSDS: CBHDS
  • Manufacturer: G A AVRIL CO
  • Product Name: SOFT SOLDERS, 45/55
  • National Stock Number: 3439-00N068155
Product Identification

Product ID:SOFT SOLDERS, 45/55
MSDS Date:11/25/1985
FSC:3439
NIIN:00N068155
MSDS Number: CBHDS

Responsible Party
G A AVRIL CO
2108 EAGLE COURT
CINCINNATI, OH 45212
US

Emergency Phone: 513-731-5133

Info Phone: 513-731-5133

Cage: 3H480

Contractor
G A AVRIL CO
CINCINNATI, OH 45212 US

Telephone: 513-731-5133

Cage: 3H480

Ingredients

449F,232C

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: <40%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3


621F,327C

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 37-60%

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.15MG/M3 DUST

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


2516F,1380C; MP

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: <0.5%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG (SB)/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: ANTIMONY: MAY CAUSE IRRIT TO
SKIN/CONT DERM. INHAL CAN CAUSE INFLAMM OF UPPER & LOWER RESP
TRACTS. IN ACUTE SEV POIS THERE MAY BE DEATH FROM CIRCULATORY/RESP
FAILURE/TOX HEPATITIS. LEAD: SHORT TERM EXPOS SYMP MAY INCL STOM
CRAMPS, PERSISTENT VOMIT, SEV ANEMIA, PERIPHERAL NEUROPATHY & ACUTE
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: ENCEPHALOPATHY FOLLOWED BY COMA,
CARDIORESP ARREST & DEATH. TIN: TIN POWDER IS MOD IRRIT TO EYES &
AIRWAYS. CHRONIC: CHRONIC POIS SYMP ARE DRYNESS OF THROAT, NAUS,
HDCH, SLEEPLESSNESS, LOSS OF APPETITE & DIZZ. LEAD: LONG TERM
EXPOS SYMP ARE SAME AS ACUTE W/METALLIC TASTE IN MOUTH. WEAK OF
EXTENSOR (SUP DAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:ANTIMONY: REMOVE FROM EXPOS & HAVE BIOLOGICAL MONITORING
UNDER DIRECTION OF MD. LEAD: NO IMMED FIRST AID GEN NEC. BIOLOGICAL
MONITORING UNDER DIRECTION OF MD IS REQUIRED I/A/W OSHA REGS. TIN:
REMOVE F ROM EXPOS. EYES: FLUSH W/COPIOUS AMTS OF WATER FOR AT
LEAST 15 MIN. SEE MD . SKIN: FLUSH W/POTABLE WATER. SEE MD . INHAL:
REMOVE TO FRESH AIR. SUPPORT BRTHG (GIVE OXYGEN/ARTF (SUP DAT)

Fire Fighting

Extinguishing Media:DRY CHEMICALS OR SAND SHOULD BE USED WITH MOLTEN
METALS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DO NOT USE WATER ON MOLTEN METALS.

Accidental Release

Spill Release Procedures:SPECIAL CARE SHOULD BE TAKEN WHEN HANDLING
MOLTEN METAL. ACCUMULATIONS OF DUST SHOULD BE VACUUMED OR WET-SWEPT
TO PREVENT AIRBORNE EXPOSURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:MATERIAL IN STORAGE CAN BECOME WET
FROM CONDENSATION. IT MUST BE THORO DRIED BEFORE ADDING TO MOLTEN
METAL. SEE OTHER SECTIONS, REFERENCES & SOURCES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST.
Protective Gloves:INDUSTRIAL TYPE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:COMPLIANCE WITH OSHA REGULATIONS AND OTHER
ACCEPTED SAFETY AND HYGIENIC PRACTICES.
Supplemental Safety and Health
EFTS OF OVEREXP: MUSCLES OF WRIST & ANKLES IS NOTICEABLE IN SERIOUS
CASES. LEAD APPEARS ON NAVY LIST OF OCCUP CHEM REPRO HAZ. SEEK
CONSULTATION FROM APPROP HLTH PROFESSIONALS CONCERNING LATEST HAZ
LIS T INFO & SAFE HNDLG & EXPOS INFO . FIRST AID PROC: RESP) .
INGEST: CALL MD IMMED .

Chemical Properties

Boiling Pt:B.P. Text:SEE INGS
Melt/Freeze Pt:M.P/F.P Text:SEE INGS
Spec Gravity:8.9 (H*2O=1)
Appearance and Odor:WHITE, ODORLESS

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HIGH TEMPERATURES MAY PRODUCE HEAVY
METAL FUME, VAPOR AND/OR DUST.

Disposal

Waste Disposal Methods:METAL TURNINGS, GRINDINGS, DRIPPINGS, OR DROSSES
SHOULD BE RECYCLED. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.